Catalogue - Insulated Conduxtor System U10 - VAHLE - (Version JPG)

See other catalogues for VAHLE

Busbar, Crane, Antenna, Gantry crane, Gantry

Text version of the page

3!a components

Transfer guide

with or without feed terminal (also serving for end cap and for anchor point in conjunction with BFU).

max. vertical and horizontal offset:: ± 3 mm


Type	Weight kg	feed clip	Cat..-No.
US 10	0.004	w/o	165 008
US 10 s	0.005	w/o	165 009
USE 10**	0.008	c/w	166 010
USE 10 S**	0.010	c/w	165 011
Feed clip only SE 10	0.005		165 178

c/w feed: USE 10 S (feed cable 6.3 x 0.8 mm)

Anchor bar for transfer guide (Aluminium]

for bolting to the track, consisting of 1 aluminium profile bar, 2 hex. screws M 5 w/washer, 2 locking pins 2 x 20.

(16.5 mm distance between conductor-surface and track)


Type	poles	A/mm	Weight kg	Cat.-No.
BFU 10 A- S	1- 8	118	0.042	165168
BFU 10A-10	1-10	143	0.052	165176


Type	poles	A/mm	Weight kg	Cat .-No.
BFU 10 B- 8*	1- 8	118	0.087	165 272
BFU 10 B-10*	1-10	143	0.101	165 274

used in conjunction with snap-in and quarter turn


Type	poles	A/mm	Weight "g	Cat.-No,
BFU 10-8	1- 8	118	0,022	165 115
BFU 10-10	1-10	143	0.026	165 123

(10 mm distance between conductor-surface and track)

* B-Type anchor bar essential lor more than 15 mm distance between conductor-surface and track on oblique cut tracks. '* Connecting cable with flat plug FLA is to be ordered separately (see page 10).

Insulated Conduxtor System U10 - VAHLE - #6

Busbar, Crane, Antenna, Gantry crane, Gantry