Support spacing: for straight runs & lateral curves, also horizontal R Conductor spacing:
INSULATED CONDUCTORS U 15
on compact hangers18 mm
on standard hangers
with insulatorsmin. 50 mm Curves: factory prepared min. radius 400 mm or in the field with curve tool BVU10/15
1912 Heating system: Conductor code: available, please consult factory. U = unipole insulated conductor
15= shroud size
25= conductor cross sectionalarea (mm Chemical and electrical properties
H = 5 m
(2) see page 4 with single collector 1 m
with double collector (KDST) 800 mmfor horizontal curves R
2 )C= copper conductor
E= stainless steel conductor Length: 6 m is standard length,
shorter lengths are available
H = 5 m
(2) with single collector 500 mmwith double collector (KDST)
400 mm
RH= RadiusHorizontalcurve U 15/25 CU 15/25 E Standard shroud, color green Cat-No. phase
(1) 162 13
•
162 15
•
Cat-No. ground
(1) 162 19
•
162 21
•
High temperature shroud, color gray Cat-No. phase
(1) 162 16
•
162 18
•
Cat-No. ground
(1) 162 22
•
162 24
• Engineering Data
Conductor RailType 2 Leakage distanceof shroudmmmax.voltageVcontinuousamp. capacityAResistanceOhm/1000 mImpedance Ohm/1000 mbased on 50 Hz & conductor spacingCross sectional areamm Custainless steel 18 mm25 mm50 mm U 15/25 CU 15/25 E 25253030660660100100.69229.077 0.6980.7010.70929.07729.07729.077
Weight kg/m0.2950.285
Selection of conductors
in accordance to ampere load and environmental conditions U 15/25 C copper conductor for power and control system applications U 15/25 E stainless steel conductor for control and data-transmission in corrosive atmospheres New
material handling techniques (automated overhead monorails) require reliable electrification and use U 15 conductors.
(1) Add last number (1, 2, 3, 4, 5 or 6 m length suffix) in accordance to bars required. (2) Recommendation 5