ACCESSORIES FOR U 35
1912 End caps
with locking pin 3 x 32
120 Typ M=factory assembled per layoutTyp L=loose
TypeWeight kgCat.-No. UK 35-M 0.064175 171 UK 35-L 0.064175 060
Transfer guides are used for transfer or power-interrupting applications.Max. vertical and horizontal offset ±6 mmmax. air gap: 20 mm
max.130 TypeWeight kgCat.-No. UTI 35/200 0.060175 061 UTI 35/300 0.060175 123 UTI 35/400 0.060175 124 UTI 35/500 0.060175 367 UTI 35/230 0.060175 501 UTI 35/450 0.060175 502
Photo shows transfer guide with conductor section and insulated hanger. UTI35 are transfer buttons (bellmouth shaped conductor ends)
with integrated isolating piece. They are factory assembled to
layout plans.In the area of the transfer guide one hanger and the locatingclamps have to be providedConductor rails, hangers and locating clamps to be orderedseparately.
50stromlos UTI35 w/o cond. Isolating sections
Typ M=factory assembled per layout
Typ L=looseConsider two extra hangers, max 2 x 400 mm apartfor stabilizingConductor rail, hangers and feeds are to be ordered separately
200 IT/U 35 Mw/o cond. 200 A 200 max. 400max. 400 min. 270feed max. 400max. 400 In order to avoid voltage bridging and for clearing of maintenance, control and live areas use two isolating sections.
Distance A depends on collector type and length of brake path of machinery.
TypeWeight kgCat.-No. TypeWeight kgCat.-No. IT/U 35/200 M 0.200175 062 IT/U 35/200 L 0.200175 101 IT/U 35/300 M 0.200175 063 IT/U 35/300 L 0.200175 102 IT/U 35/400 M 0.200175 064 IT/U 35/400 L 0.200175 103 IT/U 35/500 M 0.200175 399 IT/U 35/500 L 0.200175 400 IT/U 35/230 M 0.200175 499 IT/U 35/230 L 0.200175 497 IT/U 35/450 M 0.200175 500 IT/U 35/450 L 0.200175 498
37