Text version of the page

1912

Insulated conductor system - 19699 ACCESSORIES FOR U 25

Expansion sections

FixpointExpansion section factory assembled on 1.5 m long conductor section incl. one rigid joint and will be installed from 150 m of system length on.
XX max. 75 m L max. 75 m Expansion sections (distance between fix points) For UDV25 C
to tmax. Lto tmax L 20 °C147 m40 °C73,5 m30 °C97,5 m50 °C58,5 m
393 31 For UDV25 AE
280 to tmax. Lto tmax L 20 °C108 m40 °C54 m 30 °C72 m50 °C42 m
156 ° C expansion capacity max. 30 mm to 33 + 30– 20 280 1500 bei 20 Investigation of expansion sections n =L1L
393 n = Number of UDV (rounded) L1 = Length of assembly minus 150 m L= Expansion capacity max. of UDV(see table) Standard shroud, color greenHigh temperature shroud, color gray
TypeWeight kgCat.-No.phaseground TypeWeightkg Cat.-No.phaseground UDV 25 C K 4
(1) 2,550171 057171 058 UDV 25 C K 4
(1) 2,550171 067171 068 UDV 25 AE K 4
(1) 1,900171 059171 060 UDV 25 AE K 4
(1) 1,900171 069171 070
30

Locating clamp

27 Photo shows hangerwith two locating clamps for an anchor point. 20 TypeWeight kgCat.-No. USK 25 K 4
(1) 0.024170 010

Feed terminals

Types UE 25, UE 25 K 4
(1) , UE 25 AE and UE 25 AE K 4
(1) are adequate to bolted joint splice
160 27 wide TypeWeightkg Connecting cable max. mm2Cat.-No. UE 25 2 x 160,190170 599 UEG 25 2 x 950,560170 597
21 M6 UEG 25-M 2 x 950,560170 396
(1) 45 UE 25 K 4 2 x 160,190170 600
45 UEG 25 K 4
(1) 2 x 950,560170 598 UEG 25 K 4
(1) -M 2 x 950,560170 397 UE 25UEG 25
190 53 wide UE 25 AE 2 x 160,150171 158 UEG 25 AE 2 x 950,456170 962 UEG 25 AE-M 2 x 950,456170 964 UE 25 AE K 4
(1) 2 x 160,150171 159
61 UEG 25 AE K 4
(1) 2 x 950,456170 963
M12 UEG 25 AE-K 4
(1) -M 2 x 950,456170 965
45 45 Cables & lugs by others.UEG requires staggered arrangement with conductor spacingof less than 80 mm. Type M = factory assembled.

24

(1) with stainless steel hardware