Text version of the page

ACCESSORIES FOR U 30

1912

Transfer guides

Transfer guides are used for transfer or power interrupting applications.Max. vertical and horizontal offset: ±4 mm, max. air gap: 10 mm.
55 US 30/120 CE 0.090133 587 US 30/75 C 0.090133 250 US 30/100 C 0.090133 260 US 30/130 CH 0.090133 280 US 30/150 C 0.090133 290 US 30/200 C 0.090133 300 US 30/200 CH 0.090133 791
25 w/o cond. 80 Transfer guides US 30 are fastened to conductor ends by means of two screws.

Isolating sections

Type M:Factory assembled per system layoutType L:Loose, including two locking pins 4 x 18Position of isolating sections per system layout. Use one extrahanger each side, max. 300 mm away for stability.Rails, hangers & feed terminal to be ordered separately. TypeWeight kgCat.-No.
180w/o cond. 180A180 max. 300max. 300 min. 235 Feed terminal max. 300max. 300 To avoid voltage by-pass by carbon brushes and to separate maintenance bays, control and main feed sections, double isolating sectionsare recommended.Dim.

A

depends on type and number of current collectors and stopping distance of the crane. TypeWeight kgCat.-No. TypeWeight kgCat.-No. IT/U 30/120 CE-M 0.021133 588 IT/U 30/120 CE-L 0.021132 580 IT/U 30/75 C-M 0.021133 070 IT/U 30/75 C-L 0.021132 560 IT/U 30/100 C-M 0.021133 080 IT/U 30/100 C-L 0.021132 570 IT/U 30/130 CH-M 0.021133 100 IT/U 30/130 CH-L 0.021132 600 IT/U 30/150 C -M 0.021133 110 IT/U 30/150 C -L 0.021132 610 IT/U 30/200 C-M 0.021133 120 IT/U 30/200 C-L 0.021132 620 IT/U 30/200 CH-M 0.021133 792 IT/U 30/200 CH-L 0.021132 640

27