DOUBLE COLLECTORS
1912 F = flexible strap connection for curvesS = rigid bar connection for straight runs
LSV
LSVG
Type for Power
**
HS with PEfor Control
*
Cat.-No.A Type **
ST without PE
*
Cat.-No.A PolesWeightkg LSV
608 DSWK 4/50 F-1 50250 320 DSWK 4/50 F-1 50250 33041,900 DSWK 4/80 F-1 80252 580–––42,100 DSWK 4/50 S-1 50258 383 DSWK 4/50 S-1 50258 38441,900 DSWK 4/80 S-1 80252 590–––42,100 DSWN 4/80 F-1 80194 703 DSWN 4/50 F-1 50194 70442,150 DSWN 5/80 F-1 80194 705–––52,350
180190 for DSWNT DSWN 6/80 F-1 80194 706 DSWN 6/50 F-1 50194 70763,000 DSWN 7/80 F-1 80194 708–––73,250
flexible strap DSWN 4/80 S-1 80194 808 DSWN 4/50 S-1 50194 80942,150
410 DSWN 5/80 S-1 80194 810–––52,350
DSWN 5-pole F DSWN 6/80 S-1 80194 811 DSWN 6/50 S-1 50194 81263,000 DSWN 7/80 S-1 80194 813–––73,250 LSV + D or FP
508 DSWNT 4/80 F-1 80194 778 DSWNT 4/50 F-1 50194 77942,150 DSWNT 5/80 F-1 80194 780–––52,350 DSWNT 6/80 F-1 80194 781 DSWNT 6/50 F-1 50194 78263,000 DSWNT 7/80 F-1 80194 783–––73,250 DSWNT 4/80 S-1 80194 814 DSWNT 4/50 S-1 50194 81542,150
137 DSWNT 5/80 S-1 80194 816–––52,350 DSWNT 6/80 S-1 80194 817 DSWNT 6/50 S-1 50194 81863,000
147 for DSWNT rigid bar DSWNT 7/80 S-1 80194 819–––73,250
310 With 2 connecting cables, each 1 m long; copper cross section 2.5 mm
2 , resp. 4 mm
2 (500 mm for TSL s. p. 18) DSWN 5-pole S (longer cable available).Don’t use double collectors, but 2 singles for curves with less than 1.5 m radius andfor transfer
industrial guides more than 45 degr. oblique cut.
863 600 Type **
for Power HS with PEfor Control
*
Cat.-No.A Type **
ST without PE
*
Cat.-No.A PolesWeightkg DSWNG6/80 80183 910 DSWNG6/50 50183 91164,15 DSWNG7/80 80183 91274,25 DSWNG8/80 80183 913 DSWNG8/50 50183 91484,35 DSWNG9/80 80183 91594,45 DSWNG10/80 80183 916 DSWNG10/50 50183 917104,55 DSWNG11/80 80183 918114,65
~ 430 DSWNGT6/80 80183 919 DSWNGT6/50 50183 92064,15 DSWNGT7/80 80183 92174,25 DSWNGT8/80 80183 922 DSWNGT8/50 50183 92384,35 DSWNGT9/80 80183 92494,45 DSWNGT10/80 80183 925 DSWNGT10/50 50183 926104,55
LSVG with D + FPLSVG DSWNGT11/80 80183 927114,65
DSWNG 11-pole connecting cable to terminal box:2 x 2.5 mm
2 for 50 Amp. trolleys2 x 4 mm
2 for 80 Amp. trolleysmax. Ø of cable outlets:1 of 36 mm and 1 of 21 mm for power circuits
1 of 29 mm and 1 of 21 mm for control circuits
** *
All ampere data for 60 % intermittent duty. For full Type designation add Power or Control, suffix e.g. DSWK 4/50 F-1 HS for Cat.-No. 250 320DSWNG 6/50 21
ST for Cat.-No. 183 911.