Catalogues - aluminium-enclosed-conductor-systems-lsv-lsvg

<-max. 80 m->-

h- ^L-*1

crane track

-«-max. 80 m->

Catalogue Aluminium enclosed conductor systems LSV-LSVG

www.vahle.de

Page

/ 32

Where to buy
this product ?

Request
a Quote

/ 32

See other catalogues for VAHLE

Text version of the page

expansion joint sections* /x


LSV				LSVG 1
^TyP^e Cat.-No.		Type Cat.-No.		Type Cat.-No.		Type Cat.-No.		Type Cat.-No.
Power line HS with PE		Power line HS with PE		Power line HS with PE		Power line HS with PE		Power line HS with PE
DSL 4/ 60	194 020	DSL 6/ 60	194 120	DSLG 6/ 60	183 560	DSLG 8/ 60	183 660	DSLG 11/ 60	183 750
DSL 4/100	195 108	DSL 6/100	195 112	DSLG 6/100	184 017	DSLG 8/100	184 021	DSLG 11/100	184 024
DSL 4/140	195 056	DSL 6/140	195 058	DSLG 6/140	183 943	DSLG 8/140	183 945	DSLG 11/140	183 948
DSL 4/200	195 109	DSL 6/200	195 626	DSLG 6/200 DSLG 6/300	184 018 183 600	DSLG 8/200	184 652	DSLG 11/200	184 655
DSL 4/300	194 060	DSL 7/ 60	194 150	DSLG 6/200 DSLG 6/300	184 018 183 600	DSLG 9/ 60 DSLG 9/100 DSLG 9/140	183 690 184 022 183 946	Control line SS without PE
DSL 5/ 60	194 070	DSL 7/100 DSL 7/140	195 113 195 059	DSLG 7/ 60	183 610	DSLG 9/ 60 DSLG 9/100 DSLG 9/140	183 690 184 022 183 946	DSLG 6/ 60	183 780
DSL 5/100 DSL 5/140 DSL 5/200 DSL 5/300	195 110 195 057 195 111 194 110	DSL 7/200	195 627	DSLG 7/100 DSLG 7/140	184 019 183 944	DSLG 9/200	184 653	DSLG 8/ 60 DSLG 10/ 60	183 790 183 800
		Control line SS without PE		DSLG 7/200	184 020	DSLG 10/ 60 DSLG 10/100	183 720 184 023
		DSL 4/ 60	194 180	DSLG 7/300	183 650	VwkM 1 \J1 1 \J\J DSLG 10/140	183 947
		DSL 6/ 60	194 190			DSLG 10/200	184 654

Expansion joints are only required for LSV and LSVG systems using bolted joints. They serve to compensate for the different expansion and contraction of the aluminium housing and the copper conductors in varying temperatures. (Plug-in type connectors manufacturer, sliding inside the hollow conductors do automatically take care of this - with the copper conductors being anchored in each standard Powerail section). Expansion joints are required if the Powerail length between two anchor points (feeds, sectionalizings and transfer guides are such anchor points and factory assembled extra anchor points FPL/Cu and FPLG/Cu are available) exceeds L/6 per Fig. 1 and 2. Corresponding to an anticipated temperature difference (At) the maximum length L would be as follows:

Fig. 1

-max. 80 r<\-*\*

fixpoint hangers

—

transfer guides

DSL

\ I

end cap line feed

end feed

At 40° C = 160 m At 45° C = 140 m At 50° C = 120 m

At 60° C = 100 m At 80° C = 80 m At 100° C = 60 m

Fig. 2

When in doubt regarding position and number of expansion joints please consult the factory for layout plans.

end cap

Mine feed

end cap Powerail fixpoint hanger

Feeding

No extra feeds required as the Powerail is not interrupted.

Collectors

No extra collectors required. Installation

The expansion joint integrated in the one meter powerail section is installed on sliding hangers in the center between two anchor points of the copper conductors. The gap dimension "a" is factory set to 30 mm, suited for a temperature of +5° C up to +30° C during installation.

Anchor points for copper conductors (** Î )


LSV			LSVG
Type	No. of cond.	Cat.-No.	Type	No. of cond.	Cat.-No.
FPL/Cu	4 & 5	194 530	FPLG/Cu	6 & 7	183 830
FPL/Cu	6 & 7	194 540	FPLG/Cu	8 & 9	183 840
			FPLG/Cu	10 & 11	183 850

When in doubt - please consult the factory.

* Above sections come ready assembled on 1 m Powerail and are a part of the system length.