Chemistry Compatibility - 3 Pages

  1. P. 1

  2. P. 2

  3. P. 3

Catalogue excerpts

head cover and clamping disc are made of thick walled molded ETFE with metal core for unsurpassed long-term performance Table for chemistry compatibility PTFE Acid amides Acids, dilute or weak Acids, strong or concentrated Alcohols, aliphatic Hydrocarbons, aliphatic Hydrocarbons, aromatic Hydrocarbons, halogenated Oxidizing acids, oxidizing agents Dimethylformamide (DMF), Acetamide, Formamide Acetic acid, Carbonic acid, Butyric acid PTFE well-proven PTFE sandwich diaphragms for increased reliability and extended service life Hydrochloric acid, Sulfuric acid, Nitric acid, Trifluoroacetic acid (TFA) Methanol, Ethanol, Butanol Formaldehyde, Ethanal, Hexanal N-Methyl-2-pyrrolidone (NMP), Triethylamine Sodium hydroxide, Potassium hydroxide, Ammonia FFKM inlet and outlet flapper valves are made of FFKM or PTFE for both highest leakage tightness and best chemical resistance Ethyl acetate, Butyl formate, Amyl butyrate Diethyl ether, Tetrahydrofurane, Dioxane Pentane, Hexane, Heptane Benzene, Toluene, Xylene Methyl chloride, Chloroform, Ethylene chloride Acetone, Cyclohexanone Ozone, Hydrogen peroxide, Chlorine valve connectors are made of ECTFE for an optimum of thermal, mechanical and chemical resistance Internal tubing and fittings made of PTFE/ETFE/ECTFE compounds Dimethyl sulfoxide (DMSO) PTFE: Polytetrafluoroethylene ETFE: Ethylene tetrafluoroethylene ECTFE: Ethylene chlorotrifluoroethylene FFKM: Perfluoro elastomer VACUUBRAND GMBH + CO KG Alfred-Zippe-Straße 4 97877 Wertheim Germany ++ excellent chemical resistance + good to limited chemical resistance – poor chemical resistance * or some solvents ‘+’ f ©VACUUBRAND GMBH + CO KG . 11/2014 . EN/995512 . The data are based on information from various literature. VACUUBRAND does not warrant the accuracy of these data. Due to the variety of possible influencing factors, they can serve only as a guide. No legal claims may be derived from user reliance on these data. CHEMISTRY COMPATIBILITY of VACUUBRAND Chemistry Diaphragm

 Open the catalogue to page 1

UNCOMPROMISING CHEMISTRY DESIGN FOR DIAPHRAGM PUMPS Fluoropolymers and perfluoro elastomers are materials containing fluorine atoms in their chemical structures. Due to their outstanding chemical resistance and their extremely low surface energy - for low material adhesion - VACUUBRAND uses these materials for all media-contacted parts in their chemical diaphragm vacuum pumps. One of the most distinguishing properties of PTFE is its outstanding chemical resistance, except for some extreme conditions such as molten alkali metals or elemental fluorine. Basically PTFE is not soluble in any organic...

 Open the catalogue to page 2

head cover and clamping disc are made of thick walled molded ETFE with metal core for unsurpassed long-term performance TABLE FOR CHEMISTRY COMPATIBILITY PTFE ETFE/ECTFE FFKM well-proven PTFE sandwich diaphragms for increased reliability and extended service life inlet and outlet flapper valves are made of FFKM or PTFE for both highest leakage tightness and best chemical resistance valve connectors are made of ECTFE for an optimum of thermal, mechanical and chemical resistance Acid amides Dimethylformamide (DMF), Acetamide, Formamide Acids, dilute or weak Acetic acid, Carbonic acid, Butyric acid Acids,...

 Open the catalogue to page 3

All VACUUBRAND GMBH + CO KG catalogues and technical brochures

  1. BVC Accessories

    2 Pages

  2. CVC 3000 detect

    2 Pages


Archived catalogues