Catalogs >
U.S. GAUGE >
Series-DT-8300-Digital-Thermometers

Series-DT-8300-Digital-Thermometers
4Pages

Catalog excerpts

Product Data TEMPERATURE PRODUCTS Series DT-8300 Digital Thermometers DESCRIPTION The AMETEK DT-8300 Digital Thermometer is a rugged field instrument designed for dependable, worry-free temperature measurement anywhere in the plant. This unique device can be used with any Type K and J thermocouple to provide quick, convenient, continuous monitoring of liquid and gas processes. The DT-8300 is ideal for use in hard to reach places such as overhead pipes since it can be mounted remotely from the sensor by use of thermocouple extension wire. Four configurations provide for wall, pipe, panel, or stem mounting. The stainless steel housing and one piece VALOX bezel/face provide a corrosion resistant package for harsh environments. This device performs reliably over a wide ambient temperature range. The large, easy reading LCD display features low power and open sensor indication. A battery-powered version is available incorporating commercially available size AA batteries for approximately 1.5 years of continuous operation. An external power model is also available for operation with an unregulated 6 to 28 VDC power supply. The DT-8300 is also inexpensive, priced far less than comparable electronic field temperature instruments. INPUT: Type K thermocouple; supplied by U.S. Gauge distributor or customer, Type J input also available ACCURACY: Basic Accuracy: ±1% of full scale (excluding T/C error) Low Range: ±2.2ºF (1.2ºC) from –40ºF to 450ºF High Range: ±2.7ºF (1.5ºC) from 400ºF to 1500ºF Cold Junction Compensation And Zero Drift: .08 degrees (F or C) Span Drift: .008% of reading/ºF (0.015% of reading/ºC) Resolution: 1ºF (1ºC) CALIBRATION ADJUSTMENT: Screw adjust permits calibration to within 1ºF (1ºC) at any desired point OPERATING TEMPERATURES: -13ºF to 160ºF (-25ºC to 72ºC), depending on power supply SELF-POWERED VERSION: Battery, 8 Size AA: 1-1/2 years continuous operation, typical. Note: Ambient temperatures above 100ºF may shorten battery life EXTERNALLY-POWERED VERSION: Supply Voltage: 6 to 28 VDC (unregulated) Supply Current: 0 to 2.5 mA DISPLAY: 3-1/2 digit liquid crystal (LCD) 0.7" high numerals; update rate once per second; display blanks out for low power condition and displays large, negative number when thermocouple or extension wires are open HOUSING: NEMA 4X design; 1/4 DIN; 302 stainless steel with one piece, VALOX front face/bezel and neoprene gasket; environmentally sealed with one-way valve for battery venting CONNECTIONS: 1/2-14 NPT stainless steel half couple seal welded to case On-line order fax: +1 215-323-9450 or e-mail: usg.sales@ametek.com Sales/Technical Support: +1 215-293-4100 | 205 Keith Valley Road | Horsham PA 19044 U.S.A. © 2014, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 9/2014 (160174) Specifications are subject to change without notice. Visit our Web site for the most up-to-date i

Open the catalog to page 1

Product Data TEMPERATURE PRODUCTS Series DT-8300 Digital Thermometers Model Selection Chart Power Pack External Supply Model number which appears on front of case * Field mount versions may be stem, wall, and pipe mounted; pipe mounting kit is optional at extra cost Stem, Wall, and Pipe Mount EXTERNAL POWER PORT 1/2 NPT 15/16" HEX TRAPPED ASSEMBLY SCREWS (2) SCREW PLUG ACCESS TO ZERO ADJUST PRESSURE RELIEF VALVE WALL MOUNTING SURFACE EXTERNAL POWER PORT 12-14 NPT 15/16" HEX THROUGH HOLES FOR #10 SCREWS Panel Mount – Cutout is 3.625 (92.1) Square 3.59 (91.3) 1.05 (26.6) TYPICAL TRAPPED...

Open the catalog to page 2

Product Data TEMPERATURE PRODUCTS Series DT-8300 Digital Thermometers Spec Number Selection Chart Series DT-8310 (-50°F to 450°F Range) Type K Model Number Series DT-8320 (-50°C to 250°C Range) Type K Model Number Series DT-8330 (-400°F to 1500°F Range) Type K Model Number Series DT-8350 (-50°F to 450°F Range) Type J Model Number * Field mount model used for wall, stem, or pipe mounting ** Eight size AA batteries not included On-line order fax: +1 215-323-9450 or e-mail: usg.sales@ametek.com Sales/Technical Support: +1 215-293-4100 | 205 Keith Valley Road | Horsham PA 19044 U.S.A. © 2014,...

Open the catalog to page 3

Product Data TEMPERATURE PRODUCTS Series DT-8300 Digital Thermometers SUB-ASSEMBLIES AND REPLACEMENT PARTS FOR DT-8300 Spec Number Selection Chart Main Frame Assemblies (Bezel, Display, and Electronics) Spec Number Selection Chart Spec No. Power Packs Battery Board Spec Number Selection Chart Case Assemblies * Accepts unregulated 6-28 VDC supply ** Accepts eight size AA batteries (not included) Spec Number Selection Chart Spec No. Field Mount for Battery Field Mount for External DC Field Mount for Battery Field Mount for External DC Miscellaneous Accessories Pipe Mounting Package Clamps and...

Open the catalog to page 4