LOGO! Hydraulic - URBACO - #1

Text version of the page

Z.A. du Couquiou – 84320 ENTRAIGUES – France Tél. : +33 (0)4 90 48 08 08 – Fax. : +33 (0)4 90 48 00 88 e-mail : urbaco@urbaco.fr www.urbaco.fr PRODUCT SHEET Hydraulic Micro Technical Center LOGO! Article Code: CC20000H DESCRIPTION This heavy duty micro technical centre with Siemens LOGO! control board can pilot electrohydraulic automatic retractable bollards. A hydraulic group can operate 1 or 2 bollards (except for High Security models). This cabinet is intended for wall-mount (pegs supplied). This MTC is delivered without control actuators. These are available as options (built-in) or as accessories (remote controls). This PLC runs URBACO limit switches, traffic lights indicating bollard position, safety loops, and remote control actuators by dry contact as well as compressor surveillance. LCD display screen and keypad are intended for the programming of operations, setting of date and time, visualisation of input/output status, and default analysis. Advantages of electro-hydraulic drive: - Oil is not compressible, - Pressure reaches up to bars. The oil used is biodegradable in compliance with international standards. Intellectual Property of URBACO – Not to copy – Specifications are not contractual – Changes likely to be made without any notice – Most of the models shown are registered – May 2008 Depending on control board programming, bollard descent is actuated by user (badge…) and bollard rises back either automatically or is actuated upward by user (radio beeper…) It should be operated in a properly ventilated environment to permit cooling off. OPTIONS AND ACCESSORIES - RE432 Radio receiver in its box, built-in, - RBE4RC radio receiver in its box, built-in, - 1, 2 or 4-channel beepers (ex. (10) (11)), - Antenna 433.92 MHz, - Weekly timer/clock, 1 channel built-in, - Remote control actuators (key selectors, keypad, card reader), - Operation logic components, - Heater, - Safety loops and detectors, - Hydraulic tubing, ready for use. 1- Metal enclosure with door and lock, 2- Siemens LOGO! PLC, 3- Hydraulic group, 4- Differential circuit breaker, 5- Connection rack, 6- Forced ventilation, 7- Documentation, 8- operation logic components (optional). COMPONENTS FP-CC20000H(V1EN) OPERATION 1 Dimensions Weight 600 x 600 x 250 mm ~43 kg Colours RAL 7035 (grey) Protection Index Shock Index IP 44 IK 10 (cabinet alone) Insulation Class II Phonic/Thermal Ventilation Locking Forced 230 V 2 points + lock Temperature -10°C to +55°C Energization Power / Watts 230 V (2P+T) 16A ~1500 W Operatability Non-stop (when oil < 70°C) 5 3 2 6 4 10 11 2 433.92 MHz 1 All connections are done on a connection rack with numbered inputs. This cabinet must be protected by a 30mAmp ground-fault circuit interrupter for protection of users. CONNECTIONS 7 8