City 0 Controller - URBACO - #1

Text version of the page

Z.A. du Couquiou – 84320 ENTRAIGUES – France Tel. +33 490 480 800 – Fax +33 490 480 088 e-mail : export@urbaco.fr www.urbaco.fr PRODUCT SHEET City 0 Controller Article Code: C0S0000 DESCRIPTION The City0 controller without automation is capable to integrate position lights and some control actuators. This City0 controller is normally associated with a cabinet or another controller (City3, 5 or 6) with built-in PLC (U100, U200 or Logo!) The City0 controller is meant to be fixed to the ground with anchoring bolts or similar. Technical compartment (2) is accessible from the front. A trap door opens onto a push button to force descent of bollard. Finally, a polycarbonate (or aluminium) printed front face with a position light red/amber and/or control actuators. The controller is delivered without control actuators. These are available as options. Examples: - Picture A : City0 with red / amber position light and protruding intercom. - Picture B: City0 with red / amber position light signalling bollard status and a City0 with control actuator to operate the bollard. Intellectual Property of URBACO – Not to copy – Specifications are not contractual – Changes likely to be made without any notice – Most of the models shown are registered – June 2006 OPTIONS & ACCESSORIES - Colours: any other RAL shade, - Red / amber position lights, - RE432 Radio receiver, - Key selector, - Keypad, - Badge / Card reader, - Analog intercom, - Switch to force descent. 1- City0 controller, 2- Standard polycarbonate front face, not printed (dimensions 199 x 110 mm), 3- Trap door for fire-fighters with special square imprint, 4- Base plate with holes for ground fixing, 5- Access trap doors located on the City0 rear, COMPONENT FP-C1S0000(V1-EN) 1 3 2 4 Height Dimensions 1300 mm 140 x 80 mm Colour RAL 7016 (Charcoal Grey) Material Protection Degree Steel >< 3 mm - Weight 12.5 kg 5 5 A A B 4 SURFACE FINISH Primer zinc coating to increase resistance to corrosion and add on adherence to the surface finishing. Thermosetting polyester powder paint, matt finish, Standard colour: Charcoal grey RAL 7016