Catalogs >
UNIVER Group >
UGM40_UNIVERSAL Gripper units for assembling, with hand lever

UGM40_UNIVERSAL Gripper units for assembling, with hand lever
10Pages

Catalog excerpts

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 1

UGM40 UNIVERSAL Gripper units for assembling, with hand lever UG = UNIVERSAL Gripper Units for assembly fully adjustable opening angle: 0° to 95° Max P = Pneumatic with hand lever The opening angle range may vary according to the jaw position and style B = Double opening; two-tip jaws available only for vertical jaw position F = Double opening; one-tip jaws available only for vertical jaw position L = Single opening; two-tip jaws H = Double opening; no tips available only for vertical jaw position 6 Sensor N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector 7 Jaw material S = Steel jaws (if not specified, jaws are supplied in alluminium) UNIVER GROUP

Open the catalog to page 1

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 2

UNIVERSAL gripper units for assembling with manual lever MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 53° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCES ANGLE ADJUSTMENT * * * : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

Open the catalog to page 2

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 3

UNIVERSAL gripper units for assembling with manual lever MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

Open the catalog to page 3

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 4

UNIVERSAL gripper units for assembling with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position With manual lever With steel arms Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

Open the catalog to page 4

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 5

UNIVERSAL gripper units for assembling with manual lever MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

Open the catalog to page 5

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 6

UNIVERSAL gripper units for assembling with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position With manual lever With steel arms Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

Open the catalog to page 6

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 7

Open the catalog to page 7

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 8

* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position With manual lever Whith steel arms Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

Open the catalog to page 8

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 9

MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 95° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

Open the catalog to page 9

UGM40_UNIVERSAL Gripper units for assembling, with hand lever - 10

UNIVERSAL gripper units for assembling with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 95° Vertical arm mount position With manual lever With steel arms Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

Open the catalog to page 10