Catalogs >
UNIVER Group >
UBM63_UNIVERSAL Power clamps

UBM63_UNIVERSAL Power clamps
10Pages

Catalog excerpts

UBM63 UNIVERSAL Power clamps UB = UNIVERSAL Power clamps fully adjustable opening angle: 0° to 135° Max M = Pneumatic with manual lever The opening angle range may vary according to the arm position and style UNIVER GROUP = Central, 15 mm offset (standard) N = No sensor = Right, 15 mm offset (standard) (with protection plate) = Left, 15 mm offset (standard) E = Electronic sensor with M12 = Central, 45mm offset swivel connector = Right, 45mm offset D = Pneumatic sensor = Left, 45mm offset = No arm = Central, oversized dowel holes Ø 8 H7, 15 mm offset = Right, oversized dowel holes Ø 8 H7, 15 mm offset = Left, oversized dowel holes Ø 8 H7, 15 mm offset = Central, oversized dowel holes Ø 8 H7, 45 mm offset = Right, oversized dowel holes Ø 8 H7, 45 mm offset = Left, oversized dowel holes Ø 8 H7, 45 mm offset Automotive NW_Rev.

Open the catalog to page 1

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

Open the catalog to page 2

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

Open the catalog to page 3

_>_ UNIVERSAL Pneumatic power clamp with manual lever I' 37 'I arm at 45 mm from pivot point (arm style E-L-F) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports...

Open the catalog to page 4

_>_ UNIVERSAL Pneumatic power clamp with manual lever I' 37 'I arm at 45 mm from pivot point (arm style V-T-U) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports...

Open the catalog to page 5

UNIVERSAL Pneumatic clamp with manual lever (arm style X-Y-Z) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

Open the catalog to page 6

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT * * * * : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

Open the catalog to page 7

UNIVERSAL Pneumatic power clamp with manual lever arm at 45 mm from pivot point (arm style E-L-F) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

Open the catalog to page 8

UNIVERSAL Pneumatic power clamp with manual lever arm at 45 mm from pivot point (arm style V-T-U) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

Open the catalog to page 9

UNIVERSAL Pneumatic clamp with manual lever (arm style X-Y-Z) MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT *** : AREA TO ACCES ANGLE ADJUSTMENT * * * * : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

Open the catalog to page 10

UBM63_UNIVERSAL Power clamps 10Pages

Catalog excerpts

All UNIVER Group catalogs and technical brochures

UBM63_UNIVERSAL Power clamps
10Pages