ACCESSORIES
54Pages

{{requestButtons}}

Catalog excerpts

ACCESSORIES - 2

Magnetic and electronic proximity sensors DF-...series The sensors mounted onto the cylinders detect the position of the piston by commutating an electric signal when approaching the magnetic field produced by the magnet incorporated in the piston itself. They are manufactured using two different technologies: electromechanical with Reed bulb; electronic with magneto- resistive effect (normally open with PNP output); upon request with NPN output. The first one with Reed bulb function both in d.c. and a.a; the second ones, electronic type function only in d.c. 30V max. In both versions the...

Open the catalog to page 2
ACCESSORIES - 3

Magnetic and electronic proximity sensors DH-... series Part numbers For the use of 3-pole cable extensions M08 and M12 with magnetic sensor DH-100/KM___, DH-200, DH-500 exclude blue wire when connecting. Note: observe polarity for d.c. use, avoid that magnetic fields affect the sensor, for cables with length exceeding 10 m insert filter KM-008200, for use with inductive loads foresee suitable filters on the load itself. The cable extension can be supplied with lengths upon request. For those versions without LED add suffix E to the part number.

Open the catalog to page 3
ACCESSORIES - 5

Overall dimensions and fixings of magnetic sensors Correct mounting The magnetic sensor is mounted onto the cylinder by means of a special clamp or bracket or simply inserted in the groove of the cylinder barrel. To order the holder for the recessed sensor DF... Series add suffix DF to the part number. Short-stroke cylinders W series (no fixing necessary) Rodless cylinders S1 series

Open the catalog to page 5
ACCESSORIES - 6

Codification key for magnetic switch mounting bracket Mounting bracket for rodless cylinders S -V Series Carriage type DKS = Mounting bracket magnetic sensor 5 = Rodless cylinder S5 - VL1 Series CARRIAGE OPTION F = Double medium carriage (VL1) D = Double mounting option for exposed reed switches NOTE: magnetic switch mounting brackets are supplied with accessories for assembling. Item DH-200 (magnetic sensor) must be ordered separately. Mounting bracket for slide units J Series DKJ = Mounting bracket magnetic sensor A = Slide unit for ISO 6431 - 6432 cylinders C = Slide unit for rodless...

Open the catalog to page 6
ACCESSORIES - 7

Magnetic sensor mounting bracket for rodless cylinders S5-VL1 Series and slide units J30-J31 for rodless cylinders Mounting bracket with double reed switches at sight mounting option DKS...D/DKJ...D Series Mounting accessories Part number Part number mounting bracket DKJ...D Series Dimensions of mounting bracket for rodless cylinders (DKS...D Series) and slide units for rodless cylinders (DKJ...D Series). Rodless cylinders Slide units for rodless Carriage option: onto the slide units, vary according to the slide unit size. Assembling example with rodless cylinders S5 Series Assembling...

Open the catalog to page 7
ACCESSORIES - 8

Magnetic sensor mounting brackets for slide units Mounting bracket with double reed switches at sight mounting option DKJ...D Series Part number Part number Dimensions of mounting brackets for slide units for short-stroke cylinders and slide units for ISO 6431 - 6432 cylinders (DKJ...D Series).

Open the catalog to page 8
ACCESSORIES - 9

Coils are devices that are used together with an electropilot to transform an electrical pulse into the mechanical operation which makes the valve switch and so, a pneumatic actuator can be controlled using an electrical (electronic) signal. UNIVER coils are formed by a self-extinguishing thermoplastic resin envelope and a coil of class H insulated wire that has been impregnated under vacuum. The electrical connection is made with MOLEX-type 2-pole female connector (U04 and U05 coils), as well connector and with loose cables. In the first case the protection degree of the coil is IP50, in...

Open the catalog to page 9
ACCESSORIES - 10

U04 10 mm coils for B Series valves U04 coils with integrated 90° upward/in-line connector or external pins continuous start Electric diagram Coil with 90° upward facing Coil with in-line connector Coil with connector in line with protecting cover foreseen for complete tightness U04 coils with loose cables (length 30 cm**) * Under continuons service a maximum temperature will not compromise the functioning of the working position if ventilated. ** Different wire lengths are available upon request.

Open the catalog to page 10
ACCESSORIES - 11

U05 15 mm coils with 90° upward / downward / in-line integrated connector continuous start frequency tension Electric diagram Coil with 90° upward facing connector Coil with 90° downward facing connector Coil with connector in line Contin. Start Contin. Start U05 coil with loose cables contin. start Part number** 110V - 230V solenoid valves must be built-in (EN 60204-1) * Under continuons service a maximum temperature will not compromise the functioning of the working position if ventilated. ** Different wire lengths are available upon request.

Open the catalog to page 11
ACCESSORIES - 12

Miniature connectors for U04 - U05 coils Miniature connector without wires Crimp terminal Standard supplied with 2 contacts Part number Miniature connector with loose cables Cable length Part number Miniature connector with cable Cable length Part number Caution! Do not invert the polarity when connecting to the coil with LED. Part number

Open the catalog to page 12
ACCESSORIES - 13

U1 22 mm coil to be used with U1 electropilot Overall dimensions continuous start frequency tension U2 30 mm coil to be used with U2 electropilot @' U3 30 mm coil to be used with U1 electropilot Coils can be replaced without intervention in the pneumatic circuit. Other voltages available on request. Coil winding: H class. * Under continuous service a maximum temperature will not compromise the functioning of the coil provided that the working position is ventilated. The solenoid valves functioning with 110V - 230V must be incorporated Overall dimensions Overall dimensions Protection...

Open the catalog to page 13
ACCESSORIES - 14

UNIVER Group Industrial Automation Electrovalve suitable for the control of single- and double-acting pneumatic rotary actuators used in industrial plants for • Body: die-cast Zamak • Rated capacity: 1200 Nl/min • Switching system: mixed • Coils: DA series (U1) - DC series (U3) Ordering code Upon request: Components suitable for use in ambients with risk of explosion.

Open the catalog to page 14

All UNIVER Group catalogs and technical brochures

  1. JLE

    5 Pages

  2. HZRS

    2 Pages

  3. HZ9N

    1 Pages

  4. HE/HF tubes

    1 Pages

  5. PRODUCT RANGE

    44 Pages

  6. NEWS 2017-2018

    32 Pages

  7. NEWS 2016

    16 Pages

  8. Product range

    44 Pages

  9. NEWS 2017

    32 Pages

  10. Valves

    210 Pages

  11. PRODUCT RANGE

    32 Pages

  12. RISERS

    4 Pages

  13. M series

    1 Pages

  14. POWER PIVOTS

    2 Pages

  15. PIN CLAMPS

    2 Pages

  16. CLAMPS

    2 Pages

  17. AIR TREATMENT

    14 Pages

  18. HIGH TECH

    75 Pages

  19. CYLINDERS

    67 Pages

  20. fittings

    36 Pages