| | | U.S. SALES OFFICES United Electric Controls 31 Old Stage Road Hampton Falls, NH 03844 Phone: 617-899-1132 email: northeastsales@ueonline.com United Electric Controls 28N. WiseAve. Freeport, IL 61032 Phone: 815-341-2588 email: midwestsales@ueonline.com United Electric Controls 1022 Vineyard Drive Conyers, GA30013 Phone: 770-335-9802 email: southeastsales@ueonline.com United Electric Controls 5829 Grazing Court Mason, OH 45040 Phone: 513-535-5486 email: midatlanticsales@ueonline.com United Electric Controls 102 Salazar Court Clayton,CA94517 Phone: 925-408-5997 email: westcoastsales@ueonline.com United Electric Controls 27 Summit Terrace Sparta, NJ 07871 Phone: 973-271-2550 email: easternsales@ueonline.com United Electric Controls 4306 Whickham Drive Fulshear,TX77441 Phone: 832-457-6138 email: southwestsales@ueonline.com United Electric Controls 5201 Arbor Court Odessa, TX 79762 Phone: 432-770-4164 email: westtexassales@ueonline.com CANADA EASTERN 68 Mosley Crescent Brampton, Ontario Canada L6Y5C8 Phone: 905-455-5131 FAX: 905-455-5131 WESTERN 148 Silver Ridge Close N.W. Calgary, Alberta CanadaT3B3T4 Phone: 403-247-3724 FAX: 403-247-3724 | | INTERNATIONAL OFFICES CHINA United Electric Controls, Shanghai Room 1011, 10th Fir, Huai Hai Zhonghua Building No. 885, Renmin Road, Luwan District Shanghai 200010, PR. China Phone: +8621-6255 8059 email: chinasales@ueonline.com United Electric Controls, Beijing Room 1006,Jainhao International Bldg. Block D, No. 116 Zizhuyuanlu, Haidian District Beijing, China 100089 Phone & Fax: +86-10-5893-0551 email: beijingsales@ueonline.com EASTERN EUROPE & SCANDINAVIA United Electric Controls 05-806 Komorow Kujawska 5, Poland Phone: +48 22 499 4804 email: easterneuropesales@ueonline.com GERMANY United Electric Controls An Der Zentlinde 21 D-64711 Erbach.Germany Phone: 496-062-7400 email: europeansales@ueonline.com INDIA United Electric Controls House no. 7, Kamalkunj Society Nizampura, Baraoda (Gujarat), India Phone: +91 (-265) -2788654 email: indiasales@ueonline.com ASIA-PACIFIC United Electric Controls, Far East No. 1-2-2, 2nd Floor Jalan 4/101C Cheras Business Centre Batu 5, Jalan Cheras 56100 Kuala Lumpur, Malaysia Phone: 603-9133-4122 email: fareastsales@ueonline.com MEXICO United Electric Controls Carretera Tampico Mante No.124 Despacho 101, Col Mexico CP 89348 Tampico, Tamaulipas Mexico Phone: 833-132-3726 email: latinamericasales@ueonline.com RUSSIA United Electric Controls, Moscow Kuusinena str., 19A, Office 310 Moscow, 125252, Russia Phone: +7 (095) 792-88-06 email: russiansales@ueonline.com | | |
| | | RECOMMENDED PRACTICES AND WARNINGS United Electric Controls Company recommends careful consideration of the following factors when specifying and installing UE pressure transmitters. Before installing a unit, the Installation and Maintenance instructions provided with unit must be read and understood. • To avoid damaging unit, proof pressure and maximum temperature limits stated in literature and on nameplates must never be exceeded, even by surges in the system. Operation ofthe unit up to maximum pressure or temperature is acceptable on a limited basis (i.e., start-up, testing) but continuous operation must be restricted to the designated adjustable range. Excessive cycling at maximum pressure ortemperature limits could reduce sensor life. • A back-up unit is necessary for applications where damage to a primary unit could endanger life, limb or property. A high or low limit switch is necessary for applications where a dangerous runaway condition could result. • Install unit where shock, vibration and ambient temperature fluctuations will not damage unit or affect operation. When applicable, orient unit so that moisture does not enter the enclosure via the electrical connection. When appropriate, this entry point should be sealed to prevent moisture entry. • Unit must not be altered or modified after shipment. Consult UE if modification is necessary. • Monitor operation to observe warning signs of possible damage to unit, such as drift. Check unit immediately. • Preventative maintenance and periodic testing is necessary for critical applications where damage could endanger property or personnel. • Supply voltage stated in literature and on nameplate must not be exceeded. Overload on a transmitter can cause damage, even on the first cycle. Wire unit according to local and national electrical codes, using wire size recommended in installation sheet. • Do not mount unit in ambienttemp. exceeding published limits. LIMITED WARRANTY Seller warrants that the product hereby purchased is, upon delivery, free from defects in material and workmanship and that any such product which is found to be defective in such workmanship or material will be repaired or replaced by Seller (Ex-works, Factory, Watertown, Massachusetts. INCOTERMS); provided, however, that this warranty applies only to eguipment found to be so defective within a period of 36 months from the date of manufacture by the Seller. Seller shall not be obligated under this warranty for alleged defects which examination discloses are due to tampering, misuse, neglect, improper storage, and in any case where products are disassembled by anyone other than authorized Seller's representatives. EXCEPT FOR THE LIMITED WARRANTY OF REPAIR AND REPLACEMENT STATED ABOVE, SELLER DISCLAIMS ALL WARRANTIES WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FORANY PARTICULAR PURPOSE. LIMITATION OF SELLER'S LIABILITY SELLER'S LIABILITY TO BUYER FOR ANY LOSS OR CLAIM, INCLUDING LIABILITY INCURRED IN CONNECTION WITH (I) BREACH OF ANY WARRANTY WHATSOEVER, EXPRESSED OR IMPLIED, (II) A BREACH OF CONTRACT, (lll)A NEGLIGENTACT ORACTS (OR NEGLIGENT FAILURE TO ACT) COMMITTED BY SELLER, OR (IV) AN ACT FOR WHICH STRICT LIABILITY WILL BE INPUTTED TO SELLER, IS LIMITED TO THE "LIMITED WARRANTY" OF REPAIR AND/OR REPLACEMENT AS SO STATED IN OUR WARRANTY OF PRODUCT. IN NO EVENT SHALL THE SELLER BE LIABLE FOR ANY SPECIAL, INDIRECT, CONSEQUENTIAL OR OTHER DAMAGES OF A LIKE GENERAL NATURE, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS OR PRODUCTION, OR LOSS OR EXPENSES OF ANY NATURE INCURRED BY THE BUYER OR ANY THIRD PARTY. UE specifications subject to change without notice. | | |