Text version of the page

STANDARD V-100

®

EPOXY GROUT

PHYSICAL PROPERTIES

Color Gray Green Compressive Strength (ASTM D-695)6 hours9,000 psi3 days15,250 psi7 days16,800 psi 7 days356,000 psi Compression Modulus Tensile Strength (ASTM D-638)4,800 psi Heat Deflection Temperature (ASTM D-648)132 F Maximum Service Temperature 150 F Work Life
@ 77 F10-15 minutes Tensile Modulus (millions)1.01psi Flexural Strength (ASTM D-790)6,800 psi

STANDARD V-100

® Mixed Viscosity 6,000 cps

A two-component, 100% solids,filled epoxy resin system of superiorquality, offering excellent flowability, high resistance to impact and extremelyrapid cure.This grout is the product of choicewhere ease of placement, suitability foruse under extremely high loads, andminimal cross section thicknesses are necessary. Other materials such asconcrete or weaker grouts may de-velop structural flaws when subjected to high concentrated loads.Standard V-100

Adhesion Slant Shear Test 4,200 psi Specific Gravity 1.7 Hardness (Shore D)90 Density (cured)105 lbs./cu. ft. Creep Test (ASTM C-1181)600 psi
@ 150 F cured 24 hours
@ 70 F 16 hours
@ 150 F1.95 x 10
— 2 in./in. Linear Shrinkage (ASTM D-2566)0.00025 in./in.
@ 77 F

PACKAGING/CONVENIENCE

Coefficient of Thermal Expansion (ASTM D-696)2.0 x 10
— 5 in./in.
@ F

Standard V-100

®

is a perfect choicefor: minutes a 15 minute working time re-mains for placement of the material. For Gel Time vs. Temperature and Mixed Viscosity vs. Temperature see next page.

â—�

Grouting machine bases

â—�

Setting anchor bolts

â—�

Setting leveling wedges

â—�

Setting sole plates

â—�

Repairing deteriorated foundationsThe rapid strength development ofStandard V-100 (cont.)

®

permits loads to beapplied much sooner after grouting thanwith other materials. Its excellent flowability permits use in extremely thincross-sections.

Physical properties shown are the result of independentlaboratory testing performed per industry recognized testprocedures. Laboratory properties aid in determining suitabilityof the product for the intended application. Field test results may vary due to procedures or ambient conditions such astemperature and humidity. Laboratory reports are availableon request. ®

is packaged in akit with the base resin packed in an oversized container large enough to serve as a mixing vessel. The hardener portion of the kit is added to the base resin at the job site. A stirring paddle is included which will fit a standard IMPORTANT ADVANTAGES:PERMANENCE Eliminates need for periodic regrouting. Saves downtime, labor andlost production. Resistance to oils, greases, acids, alkalies and solvents is much greater than that of cement-based materials. Tensile and flexural strengths are at least 15 times that of concrete and compressive strength is about 5 times that of concrete.

1

/

4

"electric drill. After a mix time of 2-3

Consult the specific Material Safety Data Sheets(MSDS) for all safety data.

17