Catalogue - Unisorb - General Product Catalog - UNISORB - (Version JPG)

See other catalogues for UNISORB

Leveling foot, Foot, Machine foot, Anchor bolt, Grout

Text version of the page

UNISORB® VIBRATION ISOLATION PAD MATERIALS

TITAN™ SHOCK PADS FOR EXTREME LOADINGS AND HEAVIEST IMPACTS

Impact shock and vibration can do costly damage to machines, mounting devices and floors and noise may reduce efficiency of operating personnel. TITAN SHOCK PADS offer an easy economical way to solve these problems.

Made of a tough textile base laminated with a specially formulated oil resistant neoprene compound, these multi-ply pads provide protection and vibration isolation needed for machines and equipment, ranging in size from presses to forging hammers. TITAN SHOCK PADS protect floors and machine mountings against damaging impact shock while absorbing vibration and dampening structure-borne noise.


TYPICAL DEFLECTION
Load in Lbs. per Sq.In.	7 Ply ¹/8 Thick	14 Ply ¹⁵/64 Thick	21 Ply ¹¹/32 Thick	31 Ply Thick	39 Ply Thick	48 Ply Thick	64 Ply 1 Thick
50	.001	.003	.005	.006	.008	.010	.012
100	.002	.005	.007	.010	.013	.015	.021
200	.003	.008	.012	.017	.021	.025	.034
500	.004	.014	.021	.031	.038	.046	.061
1,000	.006	.022	.032	.047	.058	.070	.093
2,000	.008	.033	.048	.070	.088	.105	.140

MANUFACTURED TO MILITARY SPECIFICATION MIL-C-882 E

TYPICAL APPLICATIONS


	• Ball mills.	• Central air conditioning.
	• Compressors.	• Foundry equipment (jolters,
	^ Forging hammers.	shakeouts, etc.).
	^ Heavy presses.	^ Generators.
	^ Impact generating	^ Hydraulic hammers.
	machine shop equipment.	^ Motors.
	^ Presses.	^ Printing presses.
	^ Pumps.	^ Refrigeration equipment.
	^ Structural bearings.	^ Textile machinery.
	TITAN™ SHOCK PAD SPECIFICATIONS
	CONSTRUCTION -	Laminated plies of oil resistant neoprene-frictioned fabric. All plies laid straight with a continuous ply of frictioned duck on each cover side. 64 plies of frictioned duck per one-inch thickness.
	MAXIMUM SIZE -	Mill run sheet sizes ¹/a" through ¹¹/32" thick: 48" wide. V2" thick and over: 48" x 14V2'.
	THICKNESS TOLERANCE -	±5%
	TENSILE STRENGTH -	4,000 psi, minimum
	HEAT RESISTANCE -	No visible change after 72 hours at 160° F.
	COMPRESSION STRENGTH -	Up to 1,800 psi perpendicular to the plane of laminations.
	DENSITY -	0.0487 lbs. per cubic inch.
	DUROMETER -	Shore A 90 ±5.

All Dimensions In Inches. Thicknesses other than standard are available.

NEOPRENE PADS

FOR MACHINES WITH FLOOR

LOADING 5 TO 125 PSI

The smooth edge design of the low cost oil-resistant UNISORB NEOPRENE PAD prevents oil, grease, and dirt from accumulating beneath the load-bearing surface of the pad. Available in 18" x 18" x ⁵/i6". Stiffness is 60 Durometer.

Unisorb - General Product Catalog - UNISORB - #5

Leveling foot, Foot, Machine foot, Anchor bolt, Grout