High spe e

STANDARD CONFIGURATION

- Vertical Cnc machining centre with travelling column and two work zones for machining in pendulum mode. - Work envelope X-2x1.000 mm; Y- 800 mm; Z-500 mm- Digital main drive AC 36 kW (S6-40%)- Direct drive milling & drilling spindle 12.000 rpm - Rapid traverse 60 m/min and acceleration 8 m/sec
UNIPRO 5-P in standard execution with X = 1.000 mmfor each work zone. UNIPRO 5-S with 1.200 mm X-axis and optional NC rotating & tilting table for 5-axes machining. UNIPRO 5-L with X-axis of 2.000 to 6.000 mm for the machining of long components. 2 in all axes - Digital Ac servo drives in all axes- High accuracy linear roller bearings in all axes- Direct position feedback with linear scales in X-, Y- and Z-axis - Automatic tool change from 63 pocket tool magazine- Tool change time 4,5 sec.- Taper size ISO 40 per DIN 69871/72 type A

ALTERNATIV CONFIGURATIONS

- Automatic pneumatic taper cleaning with compressed air - Fully enclosed guarding section with electronic interlocks - Flexible clamping concept with 45° clamping face for clamping tables in various configurations - Chip conveyor with integrated coolant collecting tank of 320 litres- Flood coolant supply 40 l/min at 4 bar - Machine industrial cooling system with industrial heat exchanger - Automatic central lubrication with function control- Two-tone machine painting in light grey / dark grey RAL 7035 / 7024 - SIEMENS Sinumerik 840 D CNC-control- Solid tapping- User interface under MS-windows - Remote access via integrated modem
3-luik_unipro_5-P_GB.indd 108-03-2006 18:03:19