TM201
1Pages

Catalog excerpts

TM201 USB INTERFACE DEVICE FOR UTM H/UTMV Specifications UTMH Interface • Variations of torque, rpm, and power* can be monitored and saved on PC. (Application software can be downloaded from our website for free) • Maximum, minimum, and average value can be displayed. • Measurement (numeric) data are automatically saved in CSV format. The unit supplies electric power to UTMH/UTMV. External dimension Unit mm • Two cables are attached: one for UTMH/UTMV and the other for PC. * Power(W)= 'In xTorque(Nm)x Rotation speed(rpm)/60 ±5V output Power supply PC Storing measured data in CSV format Receiving data from UTMH/UTMV Application software for USB interfaces• Supporting USB interface option for TM201, TM400, TM700, and TM301. • Enabling real-time display of torque measured by UTMH/UTMV, parameter settings, calibration, and data recording in CSV format. ■ Display mode <Normal> 1. Single After "start" button is pressed, data will be recorded once for pre-set time period. 2. Continuous "Single" mode operation will be repeated in cycle until "stop" button is pressed. 3. Hold trigger (only with the TM301) After "start" button is pressed, it will be put on standby for a trigger ("hold"). It will start importing data when "Hold" button is pressed. *Pre-trigger setting range: 0 to 99% 4. Level trigger After "start" button is pressed, it will be put on standby for a trigger (variable conditions) It will start importing data when the input level goes above or below the pre-set limit in pre-determined direction. <History> Display saved graph data ■ Trigger function Pre-trigger/trigger slope/repeating trigger UfllPULiE https ://www. unipulse, tokyo/en/

Open the catalog to page 1

TM201 1Pages

Catalog excerpts

All UNIPULSE Corporation catalogs and technical brochures

TM201
1Pages