Catalogs >
UNIPULSE Corporation >
FC400 Force

FC400 Force
1Pages

Catalog excerpts

Specifications High-Speed A/D conversion and powerful digital processing capability of 2400 times/sec. High display resolution of 1/100000 (max). ffifi * H Measurement can be performed quickly and precisely due to high speed A/D conversion. Application software for USB interface With communication through USB interface, logging, graph display, setting parameters, and calibration can be done. Structure of product code Analog External signal Excitation voltage Signal input range Display unit Display value Display frequency Status display DC5V±5% Output current: 90mA DC2.5V±5% Output current :45mA(depending on settings) Ratiometric method (Up to 6 3500 load cells can be connected in parallel)_ Non-linearity: within 0.01%FS Zero drift: 0.0002%FS/'C Typ Digital low-pass filter 0.1 to 600 Hz Moving average filter OFF, 2 to 999 times Speed: Resolution: Character height 8mm Numerical display by 7-segment green LED Sample, Peak, Bottom, Peak&Bottom, Average Output signal Input signal Transistor’s open collector output Vceo=30V, lc=50mA Selectable/configurable Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.). *DC24V external power supply is required. Compact size It can be fit into a limited space! Light weight & compact body for 35mm DIN rail mount. External dimension ■ FC400-DAC-FA ■ FC400-EIP-FA Digital Peak & Bottom hold. Upper and lower limit comparison OK/NOK judgement in fast process can be made. Input conversion value display The output signal level of load cell can be displayed in mV/V/ for monitor purpose. Malfunction indicator or faulty sensor can be differentiated easily. 6-digit display 24bit A/D converter enables 6-digit display UfllPULiE https ://www. unipulse, tokyo/en/

Open the catalog to page 1

FC400 Force 1Pages

Catalog excerpts

All UNIPULSE Corporation catalogs and technical brochures

FC400 Force
1Pages