F372A
2Pages

Catalog excerpts

GRAPHIC DISPLAY/TOUCH PANEL TYPE DIGITAL INDICATOR • CE marking certification • RoHS -compliant product • 2000 times/sec high-speed processing • Analog monitor output Voltage output is proportionate to the input signal making the recording on recorder convenient. Approx. 2V per 1mV/V strain gauge input • A variety of interfaces RS-232C/BCD output(Sink type / Source type)/D/A output/ DeviceNet/CC-Link • I/O input: minus common I/O output: selectable between sink and source type • 3.5 inch color LCD module & touch panel Setting operation made easy via direct touch on the touch panel. • Multi calibration function Stores calibration values for 4 ch portions and can be selected via touch panel or external signal • Alarm function Monitors if the measured value is abnormal ■ Hi/Lo limit for in comparison setting ■ A/D input range ■ Overflow ■ Digital zero regulation value Waveform display Storing of measured data and setting values Input signal from the sensor is displayed as real-time waveform display. Greatly shortens the adjustment time during the machine’s start-up. Assuredly cancels vibration, noise and unwanted inputs. The filtering results can be confirmed from the waveform. Greatly improves the machine’s reliability through its in-process operational check. The machine’s operation can be consistently monitored through the waveform and hold points in-process check. Can also be used when investigating causes of the machine’s trouble. Work selection (multi hold) Using the special communication software, the setting values can be edited and stored. The same special communication software can also create the CSV output of the measured data. Extended functions through simple screen operation Double hold 2 types of Hold functions can be simultaneously performed. 9 Previous value comparison The difference generated after deducting the measured value held earlier can be compared with the Hi/Lo limit. • Relative value comparison (only during Double hold) The difference (relative difference) between hold value A and hold value B can be compared with the Hi/Lo limit. This function compares the required points in the waveform with the Hi/Lo limits. F372A stores up to 16 types of settings (settings such as types of holds or Hi/Lo limits) which can be selected via external signals. [Types of holds] Sample, Peak, Bottom, P-P, Average, Inflection Point, Relative Maximum, Relative Minimum, Relative Difference [Setting of range] Externally specified range (Peak, Bottom, P-P, Average) Externally + time specified range (Peak, Bottom, P-P, Average) Level + time specified range (Peak, Bottom, P-P, Average) Level (Peak, Bottom) UniPULiE https ://www. unipulse,

Open the catalog to page 1

Structure of product code ©Standard unit ©Interface External dimension Panel cut dimension Panel thickness 1.6 to 3.2 mm Unit: mm For F370 and F371 users F372A is the replacement model for F370 and F371. The setting method and functions of F372A have been made compatible with that of F370 and F371 , even if the extended functions of F372Awere not utilized. UfllPULiE https ://www. unipulse, tokyo/en/

Open the catalog to page 2

F372A 2Pages

Catalog excerpts

All UNIPULSE Corporation catalogs and technical brochures

F372A
2Pages