F331
1Pages

Catalog excerpts

DIN96x48 SIZE DIGITAL INDICATOR Setting and controlling can be done by a PC Specifications • When installing You can do initial setting and calibration. Installation task is easy because you can do it with confirming waveform data. PC is not required after operation is started. <lnitial setting and calibrations> You can do the read ■ write of the setting values and calibration. It displays input signal in waveform. You can see output timing of upper/lower limit comparison and hold at a glance. Saving of waveform data is also possible. % When continuous control is required for e.g. long term test When it is required, you can read and record measured value in real time by connecting a PC all the time. It records measured value and status (Upper/Lower limit, Hold) for up to 10000 times. You can check judgment result by the OK/NG counting function. % If result is judged as NG(Not good) You can pursue the cause by comparing parameter set and waveform data of NG result with the data of when it is installed. Data when installed Structure of product code F331 □ □ ©Standard unit ©Excitation voltage Sign 1 Excitation voltage External dimension ©Interface i One optional interface can be added in addition the standard interface. (Front View) (Side View) (Rear View) Panel cut-out Panel thickness 1.6 to 3.2mm UfllPULiE https ://www. unipulse, tokyo/e

Open the catalog to page 1

F331 1Pages

Catalog excerpts

All UNIPULSE Corporation catalogs and technical brochures

F331
1Pages