CFM-2 Ultraprobe 9000 & 10,000: CFM 9/10RAS/RAM Remote Access Sensor: Enhances leak detection of low levelleaks and negative pressure (vacuum) leaks. Designed for close up scanning. The receiving chamber focuses all low level acoustic energy straight to the transducer with little loss of energy. Ultraprobe 550, 2000: RAS-2 Ultraprobe 9000 & 10,000: RAS 9/10 When accessibility isan issue such as when a motor is contained within a closed professional cabinet, or a test point is in a hard-to- reach area, the RAS/RAM is an answer. Mount the RAS Sensor on the test point and run a cable to an access area where the RAM (Remote Access Module) can be placed. When the point is to be tested, plug the RAM into your Ultraprobe and view or data log the information.Ultraprobe 550, 2000: LRM-2 Ultraprobe 9000 & 10,000: LRM-9/10UWC Ultrasonic Wave Form Professional concentrator:

ULTRAPROBE

® HTS-10Holster:LRM Long Range Module: CFM The Close Focus Module

ACCESSORIES

UWC 2000 Ultraprobe 9000 & 10,000: UWC 9/10 More than double the detectiondistance of standard scanning modules with this extremely sensitive and directional parabolic dish. The UWC utilizes seven transducers to provide pinpoint accuracy with a 5°reception field. Detection Range: 34 bar (5 psi) through .127 mm (.008”) orifice at distance of 30.48 m (100 ft). Ultraprobe 550, 2000: HTS-1 Carry your Ultraprobe on your belt, hands free. Be sure to order the correct holster for your Ultraprobe model. Ultraprobe 100: Ultraprobe 201 Grease Caddy: HTS-201 Ultraprobe 550, 2000, 9000: HTS-2 Ultraprobe 10,000: HTS-10DHC Noise Isolating Headphones: QCH Quick Charge: Shortens the fullcharge time down to one hour. Sheath: A cover for the Ultraprobemetered pistol housing. Made of sturdy Cordura fabric, it protects the housing from scratches and bangs. Ultraprobe 550, 2000, 9000 A uniquely designed parabolic micro-phone that lets you detect leaks and electrical discharges at a distance. The LRM doubles the detection distance of standard scanning modules. Ultraprobe 550, 2000: There are two models. Both meet orexceed ANSI specifications and OSHA standards with over 23 dB of noise attenuation. DHC-2 has a headband loop to keep the phones over the ears while DHC- 2HH is for Hard Hat use. The DHC-2HH is standard equipment for Ultraprobe models except the model 100.

The ultrasound approach