Series 50.005.101 - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Product Information Bi stable cartridge valve, DN 5 A. u. K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: info@akmueller.de Internet: www.akmueller.de Characteristics Servo-controlled Pretested functional unit Suitable for the thermal as well as chemical disinfection Long term performance capability Internal triple pollution protection compact design Optimized Cv-value for DN 5 (8,5 l/min at 1 bar) Optimized water hammer characteristic by low noise emission according to EN 60730 and EN 15091 Easy to assemble and service Standard connection Cylindrical design Low power consumption Applications Description 2/2-way solenoid cartridge servo controlled valve of DN 5 in bi stable version, to be used particularly in electronically controlled, battery driven sanitary fittings. Sanitary fittings, as electronic faucets Irrigation systems Industrial appliances Any fitting position Suitable for spray and jet water High operating safety through the use of high quality material Hygiene benefit by 100% final testing with air The power consumption is minimised by the use of impulse control (pwm) to increase long term performance, durability and battery life. typical performance curve The design outline had been reduced so far that integration in appropriate components, while using a minimum amount of space, is given. Positive properties are extended due to the simple “screw in” version, which supports easy assembly, service and tests by the customer. The design of a separate valve seat by the customer is not to apply, as otherwise is needed, if a pilot valve will solely be used. The rate of flow of the cartridge valve has been optimized in such a way, that the nominal diameter of DN 5 fulfils the standard requirements for sanitary tap ware. © copyright A.u.K. Müller, subject to changes without prior notice

 Open the catalogue to page 1

Product Information Bi stable cartridge valve, DN 5 Technical Data Series 50.005.101 cartridge valve 2/2-way screw-in, servo controlled bi stable, pulse controlled Fitting position cold and heated potable water and physically and chemically similar media Pressure surge Burst pressure other voltages on request Operating voltage Before screw in o-rings are to be greased with silicone grease. Nominal power Protection Type IP 65 Insulation class B Inlet cross section higher IP-classes on request according to EN 60730 Good resistance to thermal (e.g., T-medium 80 ° C / 10 minutes) and chemical disinfection....

 Open the catalogue to page 2

Product Information Bi stable cartridge valve, DN 5 Other variant on request For use outside wash basin applications, a flow-optimized variant with a Kv value of 11 l / min is available on request. The water hammer characteristics and noise emissions in accordance with DIN EN 15091 are to be tested in the corresponding faucet. typical performance curve flow optimized © copyright A.u.K. Müller, subject to changes without prior notice

 Open the catalogue to page 3

Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany Tel.: Fax: e-mail: info@akmueller.de Internet: www.akmueller.de © copyright A.u.K. Müller, subject to changes without prior noti

 Open the catalogue to page 4

All A. u. K. Müller catalogues and technical brochures

  1. Series 11.000

    4 Pages

    En
  2. Industry

    16 Pages

    En
  3. Sanitary

    12 Pages

    En
  4. Medical Technology

    12 Pages

    En
  5. Vending

    16 Pages

    En