Series 12.017.800 - 6 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

Catalogue excerpts

Product Information A. u. K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: info@akmueller.de Internet: www.akmueller.de Characteristics Three-stage filter insert Two-stage filter also available Filter inserts are replaceable Applications Drinking water supplies Filter insert for servo controlled valves inlet of ¾” BSP / Ø 19 mm internal diameter Technical Data Type Dirt strainer mechanical three-stage filter optional two-stage filter Fitting position The three-stage dirt strainer combines three consecutively arranged filters of different mesh sizes in one housing. cold and heated potable water and physically and chemically similar media It ensures coarse, medium and small particles are filtered out of the flowing medium. T-Medium 1 - 6 7 , 8 The large filter area allows for a high flow rate, despite the smallest filter mesh size being just 0,2 mm. The dirt strainer is available with G 3/4 male or female thread allowing easy integration in existing applications. Materials Body stainless steel Mesh sizes PA 6/6 glass fibre reinforced Socket of filter stack PPSU / EPDM (o-ring) POM / EPDM (o-ring) © copyright A.u.K. Müller, subject to changes without prior notice

 Open the catalogue to page 1

Product Information Dirt strainer, DN 17 Options Type Three-stage filter staple Version | Two-stage filter staple on request. Other connection combinations of the housing on request. 1) 2) 3) 4) FitSys 18 Connection Type G FitSys 18 Connection Type F JohnGuest Connection Type PM2808E JohnGuest Connection Type PM2810E © copyright A.u.K. Müller, subject to changes without prior

 Open the catalogue to page 2

Product Information Filter stack assembly - two stage ID: 008828 Two-stage filter staple in inlet of valve G 3/4 Ø19 inner diameter. (e.g. 01.010.126) Mesh sizes Filter stack assembly - three stage ID: 008829 Three-stage filter assembly in inlet of valve G 3/4 Ø19 inner diameter. (e.g. 01.010.126) Mesh sizes Replacing the filter stack Only pull Do not twist © copyright A.u.K. Müller, subject to changes without prior notice

 Open the catalogue to page 3

Product Information Dirt strainer, DN 17 The housing can be varied with other components. © copyright A.u.K. Müller, subject to changes without prior no

 Open the catalogue to page 4

Product Information two stage filter stack three stage filter stack stainless steel filter stainless steel filter flow restrictor flow restrictor flow restrictor check valve MR 04 (65 °C) in the range of 5,0 - 20,0 l/min (see separate datasheet "Flow regulator") MR 06 (65 °C) in the range of 0,5 - 9,0 l/min (see separate datasheet “Flow regulator”) MR 19 (98 °C) in the range of 3,0 - 22,0 l/min (see separate datasheet “Flow regulator”) Some components can be combined up to a depth of 34 mm. Recommended combinations C In flow direction the order filter unit, flow regulator is to be observed! Do...

 Open the catalogue to page 5

Product Information Dirt strainer, DN 17 typical performance curve Technical Data Cv-value 1 - 4 1) two-stage 2) three-stage Cv-value 5 1) free outlet 2) with tube 4 x 0,75* l/min l/min Cv-value 6 1) free outlet 2) with tube 6 x 1,0* Cv-value 7 1) free outlet 2) with tube 8 x 1,25* © copyright A.u.K. Müller, subject to changes without prior notice Cv-value 8 1) free outlet 2) with tube 10 x 1,5* * Tube length: 6,5 cm (2,56 in) / dimensions in (without components)

 Open the catalogue to page 6

All A. u. K. Müller catalogues and technical brochures

  1. Series 11.000

    4 Pages

    En
  2. Industry

    16 Pages

    En
  3. Sanitary

    12 Pages

    En
  4. Medical Technology

    12 Pages

    En
  5. Vending

    16 Pages

    En