Series 04.050.916 - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Product Information 2/2-way drain valves NO, DN 50, IP 65, IP 68 A. u. K. Müller Solenoid valves Control valves Special valves and systems A.u.K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: info@akmueller.de Internet: www.akmueller.de Characteristics  Direct acting  Protection type IP 68 using cable, respectively IP 65 using connector  Normally open (NO)  Potted coil  Coil system protected against corrosion by separation to medium by membrane  Optional valve body made of PVDF or stainless steel and FKM membrane for higher resistance to chemicals  Optional flush spout on valve body Valve body: PVDF Valve body: Stainless steel  Long term performance capability  Maximum medium temperature 98 °C (208 °F)  No minimal pressure required Applications Description 2/2-way direct acting dump valve of nominal diameter DN 50 for controlling low aggressive media, such as cleaning or disinfection agents, direct acting with normally open operation mode NO (normally open).  Industrial washing machines and dishwashers  Cleaning devices for medical equipment  Cleaning and disinfection systems in the dairy industry and process engineering Valves of this type are medium separated having a single chamber valve body with the inlet at ninety degrees to the outlet. They can be manufactured in various materials and equipped with threaded or hose connections. Electrical operating safety is achieved by insulation class F and supported by an integrated protective circuit.  Suitable for spray- and jet water  UL approved versions available  High operating safety by the use of high quality materials and 100% final testing of the products Typical performance curve p / psi 0,0 Protection type IP 68 is achieved in conjunction with cable connection, IP 65 by using a mounted connector. The smooth internal shape improves liquid flow and avoids dirt traps. The valve bodies can be equipped with an additional flush spout. Valve housing made of PPE or stainless steel are suitable for hot water. Valve housing made of PVDF have a higher resistance to chemicals where stainless steel has both features. p / mbar © copyright A.u.K. Müller, subject to ch

 Open the catalogue to page 1

Product Information 2/2-way drain valves NO, DN 50, IP 65, IP 68 Optional flush spout Technical Data Type Drain valve 2/2-way-solenoid valve, direct acting Fitting position Solenoid pointing upwards Low aggressive media, such as cleaning or disinfection agents within potable water T-Medium PPE Stainless steel PVDF Coil type MS.010 integrated protection circuit (high voltage peak limitation) and rectifier Nominal voltage Thickness of the mounting flange for all valve bodies: 5 mm (0.197 in) Valve body: PVDF V DC V DC V AC/DC *) V AC/DC V AC/DC V AC/DC Voltage tolerance ±10% Duty cycle Nominal power Protection...

 Open the catalogue to page 2

Product Information 2/2-way drain valves NO, DN 50, IP 65, IP 68 Series 04.050.916 Options Material © copyright A.u.K. Müller, subject to changes without prior notice

 Open the catalogue to page 3

Product Information 2/2-way drain valves NO, DN 50, IP 65, IP 68 Series 04.050.916 Options Material Stainless steel on request © copyright A.u.K. Müller, subject to changes without prior notice

 Open the catalogue to page 4

All A. u. K. Müller catalogues and technical brochures

  1. Series 11.000

    4 Pages

    En
  2. Industry

    16 Pages

    En
  3. Sanitary

    12 Pages

    En
  4. Medical Technology

    12 Pages

    En
  5. Vending

    16 Pages

    En