Catalogs >
A. u. K. Müller >
Series 01.010.225 Servo-controlled solenoid Valve NC, DN 10

Series 01.010.225 Servo-controlled solenoid Valve NC, DN 10
2Pages

Catalog excerpts

Series 01.010.225 Servo-controlled solenoid Valve NC, DN 10 - 1

Product Information Servo-controlled solenoid valve NC, DN 10 A. u. K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: info@akmueller.de Internet: www.akmueller.de Description 2/2-way solenoid valve of nominal diameter DN  for use with cold and heated potable 10 water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Servo-controlled Normally closed (NC) Solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4x90° Suitable for hot water up to 90 °C Similar performance for alternating or direct current Long term performance capability Optimized water hammer characteristic by low noise emission according to EN 60730 High operating safety by the use of high quality materials and 100% final testing of the products Steam appliances Applications Dental appliances Hot / cold drink dispensers Industrial appliances Air conditioning Agricultural implements Pollution equipment Temperature equalisers Dish washers Ice machines Washing machines Water treatment Valves of this design are double-chamber straight valves and can be manufactured with various connections. and typical performance curve Δp / psi Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. Coil systems for common voltage frequency ranges are available.

Open the catalog to page 1

Series 01.010.225 Servo-controlled solenoid Valve NC, DN 10 - 2

Product Information 004802 PPO beige G 3/4 Servo-controlled solenoid valve Technical Data cold and heated potable water and physically and chemically similar media any, preferably with coil upwardly Fitting position 2/2-way 2 chamber straight valve, servo-controlled solenoid valve Coil type PA 66 glass fibre reinforced PPE on request PEI on request (T-medium max. 30 °C) Materials Valve body Pressure surge 1) Fixing groove 1 , 2 valve chamber Flow regulator other voltages on request Voltage tolerance +10% -15% stainless steel EPDM NBR (on request) VMQ (on request) Coil coating PBT,PET or...

Open the catalog to page 2