Agricultural Engineering - 12 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

Valves for Agricultural Engineering Systems, machinery and equipment for the dairy industry Systems for automated animal feeding and drinking troughs In the sector of agricultural engineering technology, our products are found in milk tanks, milking machines as well as cleaning and disinfecting equipment for the dairy industry. Used in the milking process, we manufacture control valves, which ensure a consistent vacuum supply. But even in plants for animal feeding and drinking troughs our valves are used. Compliance with strict regulations and laws in this sensitive environment is important to us so we use only food grade and safe materials for our components, to ensure the food is not affected. The use of certifiable materials maintains the high quality of our products and offers the necessary security. © copyright A.u.K. Müller, technical changes reserved

 Open the catalogue to page 1

A. u. K. Müller Drain Valves (NC/NO) Valves of this type are used to drain low to highly aggressive liquids, in washing or flushing equipment for milk cooling tanks, milking machines and in cleaning and disinfecting equipment used in the dairy industry. These are medium separated single chamber valves with inlet 90 degree to the outlet and nominal diameters of 40 or 50mm. Designed as normally closed (NC) or normally open (NO) the valve housing can be manufactured in materials such as PPE, PVDF or stainless steel. Protection type IP 68 is achieved with a moulded cable connection or IP 65 by using...

 Open the catalogue to page 2

A. u. K. Müller Vacuum Controlled Drain Valves Vacuum controlled drain valves are used as a 2/2 or 3/2-way valves with a nominal diameter of DN 40 in cleaning and disinfection equipment for dairies. They are suitable for controlling low aggressive media, such as cleaning or disinfection agents. Valves of this type have a medium separated control pressure chamber and are suitable for spray and splash water with no minimum pressure required. Depending on the customer’s requirements, the valve housing are made either of PPE or PVDF. Both materials are suitable for hot water and have a good resistance...

 Open the catalogue to page 3

The VACUMASTER is used for milking installations with a regulated or unregulated vacuum pump. In the first case the VACUMASTER keeps the milking vacuum constant within narrow limits (± 1 kPa). In the second case the VACUMASTER is used for fine adjustment. The function of the VACUMASTER is based on a low-inertia differential pressure principle with high control of the speed and accuracy which requires no electrical power. Adjustable milking vacuum in the range of 35 - 60 kPa Maintains accurate vacuum (± 1kPa) Any fitting orientation, Low leakage of air Low Noise due to streamlined air intake design...

 Open the catalogue to page 4

Solenoid Valves Control Valves Special Valves and Systems Unit 4, Brookside Business Park Brookside Avenue F-77600 Bussy Saint Martin Possible product certifications available on request © copyright A.u.K. Muller, changes reserved

 Open the catalogue to page 5

All A. u. K. Müller catalogues and technical brochures

  1. Series 11.000

    4 Pages

    En
  2. Industry

    16 Pages

    En
  3. Sanitary

    12 Pages

    En
  4. Medical Technology

    12 Pages

    En
  5. Vending

    16 Pages

    En