Catalogs >
A. u. K. Müller >
29.010.326 Solenoid valve NC, DN 10 three chambers

29.010.326 Solenoid valve NC, DN 10 three chambers
2Pages

Catalog excerpts

29.010.326 Solenoid valve NC, DN 10 three chambers - 1

Product Information Solenoid valve NC, DN 10 three chambers Characteristics servo-controlled normally closed (NC) long term performance capability suitable for hot water up to 90 °C easy to assemble and service solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90° any fitting position high operating safety through the use of high quality materials and 100% final testing of the products Description 2/2-way solenoid valve of nominal diameter DN 10 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are three chamber straight valves and can be manufactured with various connections. The flow path of the inlet is devided downstream the first chamber into two subsequent chambers, which have to be operated separately. The function is similar to two single valves assembled in line with a redirection of a flow path. irrigation systems industrial appliances air conditioning pollution equipment dish washers washing machines water treatments typical performance curve One of the outgoing chamber can be designed as a direct acting valve on request and will close completely in case of low pressure Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. © copyright A.u.K. Müller, technical changes reserved

Open the catalog to page 1

29.010.326 Solenoid valve NC, DN 10 three chambers - 2

Product Information Solenoid valve NC, DN 10 three chambers Technical Data Type Fitting position cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type 2/2-way three chambers, servo-controlled solenoid valve other voltages on request Voltage tolerance +10% -15% 1) Fixing groove 1 , 2 , 3 valve chamber Duty cycle Protection type Nominal power Valve body PA 66, glass fibre reininforced Plunger guide stainless steel Coil connections flat tabs 6,3 x 0,8 mm plug socket according to EN 175301-803 (IP65), several cable connections (IP67,...

Open the catalog to page 2