01.010.114 Direct acting solenoid valve, DN 10 media separated - 3 Pages

  1. P. 1

  2. P. 2

  3. P. 3

Catalogue excerpts

Product Information Direct acting solenoid valve, DN 10 medium separated Characteristics direct acting normally closed (NC) internal plunger assembly medium separated low pressure range of up to 60 mbar solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90° suitable for hot water up to 98°C long term performance capability high operating safety by the use of high quality materials and 100% final testing of the products Applications dosing systems low pressure applications cleaning equipment industrial appliances Description This 2/2-way solenoid valve has a 10 mm orifice and is designed for use with potable water and physically and chemically similar media. It is suitable for use in low pressure applications such as controlling flow from a tank and can handle a maximum pressure head of 60 cm. The valve is direct acting in operation, normally closed (NC) and the internal plunger assembly is separated from the medium. These valves have a single body chamber. Coils are available in all common voltage and frequency ranges. typical performance curve p / psi 0,0 A high level of electrical operating safety is achieved through its insulation class F which can be supported by an integral protective circuit. The use of high quality insulation materials enables a 100 % duty cycle is be achieved, even at high medium temperatures. For example, the valve body is reinforced with glass fibre to enable use with hot water. Protection against corrosion of inner parts exposed to the medium is achieved by a separating membrane. p / mbar © copyright A.u.K. Müller, technical changes reserved

 Open the catalogue to page 1

Product Information Direct acting solenoid valve, DN 10 medium separated Technical Data Type 2/2-way single chamber valve inlet ninety degree to outlet, direct acting Fitting position any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media Coil type solenoid valve other voltages on request Voltage tolerance +10% -15% Duty cycle Protection Type 1) Fixing groove Nominal power Coil connections flat tabs 6,3 x 0,8 mm plug socket according to EN 175301-803 (IP65), several cable connections (IP67, IP68) Insulation class Valve body PA 66 glass fibre...

 Open the catalogue to page 2

Product Information Direct acting solenoid valve, DN 10 medium separated Options Material 14,5 nozzle with G 1/8 female Ø 12 14,5 nozzle with M10x1 female Ø 12 14,5 nozzle with 1/8 NPT female 14,5 nozzle with M10x1x12 female Ø 14,5 nozzle internally star shaped © copyright A.u.K. Müller, technical changes reserved

 Open the catalogue to page 3

All A. u. K. Müller catalogues and technical brochures

  1. Series 11.000

    4 Pages

    En
  2. Industry

    16 Pages

    En
  3. Sanitary

    12 Pages

    En
  4. Medical Technology

    12 Pages

    En
  5. Vending

    16 Pages

    En