01.007.111 Servo-controlled solenoid valve NC, DN7
2Pages

{{requestButtons}}

Catalog excerpts

01.007.111 Servo-controlled solenoid valve NC, DN7 - 1

Product Information Servo-controlled solenoid valve NC, DN 7 A.u.K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: info@akmueller.de Internet: www.akmueller.de Characteristics servo-controlled normally closed (NC) solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4x90° suitable for hot water up to 90 °C similar performance for alternating or direct current long term performance capability optimized water hammer characteristic by low noise emission according to EN 60730 high operating safety by the use of high quality materials and 100% final testing of the products Description 2/2-way solenoid valve of nominal diameter DN 7 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are single chamber valves with the inlet ninety degrees to the outlet and can be manufactured with various connections. Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. steam appliances dental appliances hot / cold drink dispensers industrial appliances air conditioning agricultural implements pollution equipment temperature equalisers dish washers ice machines washing machines water treatment typical performance curve By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. © copyright A.u.K. Müller, technical changes reserved

Open the catalog to page 1
01.007.111 Servo-controlled solenoid valve NC, DN7 - 2

Product Information Servo-controlled solenoid valve NC, DN 7 Technical Data Type solenoid valve 2/2-way single chamber valve inlet ninety degree to outlet, servo-controlled Fitting position any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type other voltages on request Voltage tolerance +10% -15% Duty cycle Valve body PA 66 glass fibre reinforced PPE on request PEI on request (T-medium max. 30 °C) Plunger guide stainless steel stainless steel PBT,PET or epoxy resin EPDM NBR (on request) VMQ (on...

Open the catalog to page 2

All A. u. K. Müller catalogs and technical brochures

  1. Industry

    16 Pages

  2. Sanitary

    12 Pages

  3. Vending

    16 Pages