COPPER — DISTRIBUTION POINT TERMINALS &ACCESSORIES

•Tyco Electronics’ unique IIDC(inverted insulation displacement connector) accommodates 18 - 24 (1.02 - .51 mm)AWG drop wires without stripping or special tools.•Tyco Electronics’ GelGuard gel sealing technology provides superior performance and is specifically formulated for environ- mentally demanding terminal applications. •An audible click indicates when the driver isproperly seated for wire insertion. •A single bolt terminates each pair into a driver module through which the connection is visible.•A single drop wire port further simplifies installation by eliminating the chance of placing the drop wire in the wrong port.•Gel-protected test ports in the top of each driver module facilitate fast, easy testing with standard test clips.•DTerminator 2 terminal blocks and plastichousings are UL Listed. Protected and unprotected blocks of the same pair count are the same size, leaving plenty of room to store wirework in the compact housings.•DTerminator 2 terminal connections can be re-entered and re-sealed many times, evenafter prolonged exposure to temperature extremes.•Special circuit markers are available for easy identification of special lines.• Molded into the housing, side-entry grommets provide built-in strain relief and can accommodate multi-pair drop wire. • DTerminator 2 terminal products are compliant with Telcordia specification TR-NWT-000975 and TR-NWT-001305. The DTerminator 2 XCX/XCP pole, strand or wallmount closure terminal is intended for new construction and rehabilitation, providing mechanical strength, security, and environmental protection for your connection. The kit consists of two main components: a plastic housing and a DTerminator 2 6-pair cross connect block.Tyco Electronics’ unique IIDC (inverted insulationdisplacement connector) accommodates 1.02 - 51mm (18-24 AWG) subscriber wires without stripping the insulation or using special tools. Wires can be connected and disconnected many times, even after prolonged exposure to extreme temperatures.The DTerminator 2 XCX upgradable terminalblock includes a ground strip. Although it is an unprotected model, the driver modules can be easily replaced in the field with protected driver modules, by replacing pairs marked T1R, T2R, etc., saving unnecessary initial cost.The DTerminator 2 XCP protected terminal blockcontains driver modules with factory-sealed circuit protectors. Each connection is protected by three-element gas discharge tube.

DTerminator 2XCX/XCP

6-Pair Plastic Cross Connect PoleMounted Terminal

DT2-XCX-06 NC00F-D X X - 5 R
Description Key is to assist with interpreting productconfiguration. Not all configurations are available. Contact Customer Service regarding availability. Model Driver Type 2 - VS/FS 265-600 24 AWG, lt. blue 3 - Unprotected 24 AWG, white X - Upgradable P - Protected 36