COPPER — CROSSCONNECTCABINETS

Test Clip #C62476-000 Single Pair Test Dat@Term test clip is equipped with 6 foot leads to allow for testing of a single pair without opening the circuit. Test Clip Assembly #A84321-000 Cross-Connect Accessories - NGXC Cross-Connect Cabinets Dat@Term Terminal Equipped Cabinets Priority Circuit Caps are used to identify priority circuits on Dat@Term blocks. Caps are red and are included with each cabinet. Additional caps may be ordered separately. (Part number is for a package of 50 caps.) Single pair Dat@Term test clip with molded talk pair with 6 foot lead to allow for testing asingle pair without opening the circuit. 50 pair Tap Industrial shoe Kit #849178-000 • Metal structure required when using a poured in place foundation. •Mounting frame 13001 for NGXC models AK, AL, AM, AP, AQ, AR, LK, LL, LP and LQ - #896860-000 Priority Circuit Caps #A72866-000 Five Pair Transfer Clip #A48124-000 For use in testing 50-pair Dat@Term terminal block. Kit consists of a front tap shoe and 50- pair test cord packaged in a carrying case. Replacement Toggles #A23927-000 Mounting Frame Single Pair Transfer Clip #D30882-000 Five Pair Transfer Dat@Term clip is used for testing pairs or transferring pairs with the ability to remove Jumper wires without interruption of service. Kit includes five pair transfer clip and carrying case. Toggles are used to replace individual drivers on the Dat@Term blocks. (Part number is for a pack of 10 toggles.) Blocks Single Pair Transfer Dat@Term clip is used for testing pairs or transferring pairs with the ability to remove Jumper wire without interruption of service. Kit includes single pair transfer clip and carrying case. •100 pair Dat@Term with 7’ tail and 710SC1connectors #A23183-000•100 pair Dat@Term with 7’ tail and AMPSTACK sealed, pluggable/bridge modules#C74891-000 Conduit Locating Template Use when placing conduit (pipe bends) through the pad to assure proper alignment of the conduit with the cable industrial seal apparatus of the cabinet. •Conduit template 25461 for NGXC models AK, AL, AP, AQ (5 holes), LK, LL, LP and LQ - #702540-000 •Conduit template 25649 for NGXC models AM and AR (6 holes) - #721854-000 Cable Seal (Cable gland) #C10343-000 Includes one (1) gland collar with foam inserts to seal around cables entering from below the cabinet through the moisture barrier. Terminal Field Fold Down Kit #D40417-000 The terminal field fold down kit allows the terminal field to be folded down when rear access is not permitted or if a fold down terminal field is preferred. The kit is available for field retrofit. Replacement Cross-Connect Wire Spools •22 gauge, single insulation, purple/white, 400' spool - #C55507-000•24 gauge, single insulation, orange/white, 400' spool - #A82775-000 Decal Kit #564744-000 Hylite Number Set #405844-000/A06095-000 Includes one (1) maintenance log 17922 and three (3) termination field records 17923. Decal kits may be ordered to replace decals initially included with the cabinet as necessary. Green and blue numbered decals used to indicate feeder / distribution block pair counts.Each cabinet comes with hylite numbers.Additional hylite numbers may be ordered in sets containing green numbers 1-3600 and blue numbers 1-4800. 25