video corpo

AM 365 Pump Drives
2Pages

{{requestButtons}}

Catalog excerpts

AM 365 Pump Drives - 1

Model AM 365 Twin Disc® Pump Drives AM 365 Pump Drive MAXIMUM input power 670 kw (899 HP) FOR Ratio 1.00:1 @ 2200 rpm Quality is Standard: • Cast iron housing • case hardened and ground spur gears • Ball bearings • Case hardened shafts • Viton seals on input shaft • Output rotation opposite the direction of input rotation • Gear ratios identical on all outputs • odular design m AM 365 Technical Data Ratio :1 0.69 0.81 0.92 1.00 1.09 1.23 1.45 MAXimum input torque MAX. Output torque Per pump pad MAXimum input Speed MAXimum Output Speed N-m (lbf-ft) N-m (lbf-ft) RPM RPM 1200 (885) 1400 (1033) 1400 (1033) 1450 (1069) 1450 (1069) 1600 (1180) 1700 (1254) 1800 2100 2100 2200 2200 2400 2500 2609 2593 2283 2200 2018 1951 1724 3480 3460 3040 2900 2660 2600 2350 (2567) (2552) (2242) (2139) (1962) (1918) (1733) OIL QUANTITY L (gal) 14.5 14.5 14.5 14.5 14.5 14.5 14.5 (3.83) (3.83) (3.83) (3.83) (3.83) (3.83) (3.83) See reverse for selection procedures. Oil Breather AM 365 Dimensions Basic Pump Drive Weight: 215 kg (474 lb) With SAE 1 Housing: 260 kg (573 lb) 420 (16.54) 850 (33.47) Maximum torque and maximum speed may be limited by clutch option. Specifications subject to change without prior notice in the interest of continual product improvement. Contact your local Twin Disc representative for engineering specifications. B62x57 DIN 5482 Ø511.2 (Ø20.13) Ø530.2 (Ø20.87) Ø552.4 (Ø21.75) 245 (9.65) 845 (33.27) 126.2 (4.97) Input Options SAE 1 Housing 65 mm cylindrical keyed shaft Splined shaft 390 (15.35) Three additional pump pads available on input side of drive. Oil Gauge 100 (3.94) 156 (6.14)

Open the catalog to page 1
AM 365 Pump Drives - 2

Pump Drive Selection Procedure 1. Identify the number and type of hydraulic pumps to be applied. 2. Check the maximum torque absorbed by the pump or pumps on each output of the pump drive. 3. Check the maximum power/torque entering the pump drive from the prime mover. 4. ompare the size of the hydraulic pumps to the selected pump drive installation dimensions to C determine if the proper clearance exists to mount the pumps on the pump drive. 5. Select the desired input configuration: B – Basic mount, either with drive plate or rubber block drive BD – Engine mounted clutch input BDS –...

Open the catalog to page 2

All Twin Disc catalogs and technical brochures

  1. TA90-7500

    2 Pages

  2. AM 450

    2 Pages

  3. AM 330

    2 Pages

  4. AM 320

    2 Pages

  5. AM 230

    2 Pages

  6. TC113

    2 Pages

  7. SP218P

    2 Pages

  8. SP314 IL

    2 Pages

  9. SP111P/211P

    2 Pages

  10. RO111P/211P

    2 Pages

  11. TD61-1180

    2 Pages

  12. TA90-8501

    2 Pages

  13. HPTO

    12 Pages

  14. Ec300A

    4 Pages

  15. IB321IL

    2 Pages

  16. AM 110

    2 Pages

  17. AM 216

    2 Pages

  18. AM 220

    2 Pages

  19. AM 230

    2 Pages

  20. AM 232

    2 Pages

  21. CX series

    2 Pages

  22. CA series

    2 Pages

  23. SP111P

    2 Pages

  24. PO314S

    2 Pages

  25. PO318S

    2 Pages

  26. TC113

    2 Pages

  27. HP600

    2 Pages

Archived catalogs