| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | How to Use This Selector Guide | | |
| | | |
| | | This guide is designed to help you select from the wide range of Kinney Vacuum pumps suppliers that best meet your needs. Your Tuthill Vacuum & Blower Systems sales representative will be pleased to assist you in making a final selection. CFM
| | |
| | | GC GC O H | | |
| | | 1. | | |
| | | Determine the desired vacuum level in inches of mercury, Torr or mbar*, and locate it on the vertical scale. I | | |
| | | |
| | | 0 | | | | |
| | | -40- | | -300- | | —1,000- | | |
| | | ■ 10- | | | 150-- | | |
| | 15,000
| | E | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | 1000 | |
| | | 0 760' | | |
| | | |
| | | |
| | | KSV | | KDP SDV | | |
| | | |
| | | Consult Factory | | |
| | | SDV | | |
| | | |
| | | |
| | | |
| | | |
| | | 100 | | |
| | | 26" 100 | | |
| | | |
| | | |
| | | | | |
| | | VB/ KLRC | | |
| | | KLRC KDP SDV | | |
| | | |
| | | |
| | | VB/ KLRC | | |
| | | KSV | | |
| | | VB/ KDP | | VB/ SDV | | |
| | | |
| | | |
| | | |
| | | |
| | | 10 | | |
| | | 291/2" | | |
| | | |
| | | |
| | | VB/ KT | | VB/ KT KSV | | VB/ KT VB/ KDP | | |
| | | VB/ KLRC KDP SDV | | | VB/ KLRC | | |
| | | VB/ KLRC VB/ SDV | | |
| | | Calculate the required capacity in cubic feet per minute or cubic meters per hour based on system volume, pump down time, gas load, and leakage (see back cover) and locate it on the horizontal scale. — | | |
| | | 2. | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | VB/ KT | | VB/ KLRC | | VB/ KT | | VB/ KT | | |
| | | VB/ KLRC | | |
| | | |
| | | |
| | | | | | | | | | | | KTC | | SDV KDP | VB/ KDP | | | | | | | | | | | | VB/ VB/ KT SDV | VB/ KT | | | | | | | | | | | |
| | VB/ SDV | | |
| | | |
| | | 1 | | |
| | | |
| | | |
| | VB/ SDV | | |
| | | The box where lines projected from the points on the vertical and horizontal scales intersect shows the possible pumps for the selected pressure and capacity. | | |
| | | 3. | | |
| | | |
| | | |
| | | |
| | | .001 | | |
| | | .001 | | |
| | | |
| | | |
| | | VB/ KTC | | VB/ KTC | | |
| | | |
| | | |
| | | '.0001 | | |
| | | .0001 | | |
| | | See "Other Factors" listed on the back page to further narrow your selection. | | |
| | | 4. | | |
| | | |
| | | |
| | | -25,000 | | |
| | | 70- | | -250- m3/h | | -500- | | |
| | | ■ 15 | | |
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | *Note: 1 Torr= 1mm mercury absolute pressure. To convert inches of mercury vacuum to Torr: Torr = (30 - inches of vacuum) x 25.4 at sea level e.g., 20 inches Hg = (30 - 20) x 25.4 = 254 Torr | | |
| | | |
| | | EXAMPLE: For 50 CFM and 80 Torr, the selector guide indicates that KD, KDH, KSV, KLRC, KDP, SDV, and T pumps should be considered. The color coding in the guide is coordinated with the colors of the headings of the columns on the inside pages which describe these pumps. | | |
| | | A review of the data in the appropriate columns will further narrow your selection to the following specific pump models: KSV-200, KLRC-100. Final selection should be based on a consideration of "OTHER FACTORS" as listed on the back cover of the folder. | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |