CC SERIES Typical Applications Lube oil Fuel oil Glycol solutions (Anti-freeze) Water treatment polymers System tool coolants Filtering waste oil Competitive Advantages Includes Carbon Bushing as Standard Ductile Iron Rotor and Idler for Strength – CC curves go to 10,000 ssu Eliminates Need for Bases Gear Reducers Adapters Couplings Coupling Guards Tuthill’s CC Series of close coupled pumps offer compactness and economy. With lots of pump performance in a relatively small space, the CC Series is ideal for package pumping skids or applications where space is limited. By eliminating the need for adapters, reducers, couplings, bases and guards, the CC Series also saves on first cost and eliminates the need for maintenance of these compontents down the road. Pump Sizes and 009 – 6.1 to 9.2 GPM Flow Ranges 015 – 10.8 to 16.2 GPM 020 – 14.4 to 21.8 GPM 030 – 21.4 to 32 GPM Application Range Viscosity to 10,000 SSU Pressure to 100 PSI Temperature • 200° F for Buna seal • 375° F for Viton seal Standard Features Single Buna mechanical seal ring Opposite NPT threaded ports Direct mount to NEMA C-face or IEC motors Carbon idler bushing Optional Features Single Viton mechanical seal Internal relief manufacturer of valve or return to tank valve BSP or SAE ports Available Features Jacketed cover Greased idler pin Tungsten carbide idler bushing Tungsten carbide idler pins 12500 South Pulaski Road Alsip, Illinois 60803 USA phone: 708-389-2500 fax: 708-388-0869 email: tuthillpump@tuthill.com E n g i n e e r e d S o l u t i o n s www. t u t h i l l p u m p . c o m Highlights Close coupled design Cast iron construction