Group: Tsubaki
Catalog excerpts
TTUPS-H Plastic Top Chain with thicker top plates. The top plates are more robust than on conventional Plastic Top Chain models. Recommended for curved parts of food conveyor lines. Thickness of top plate: 9.8 mm Adopted an even, thick top plate with enhanced durability. Ideal for conveying food trays. Standard type (gray) has anti-static properties. This prevents static electricity (sparks) build-up due to friction. Adopted a D-pin shape for connecting pins. This prevents cracks caused by pin fitting. Chains can also be disassembled and connected from either side. Plastic chain does not...
Open the catalog to page 2Features • Top plate with a thickness of 9.8 mm makes for a more chip-proof chain compared to conventional models. • D-pin shape has been adopted for the connecting pins, which prevents the occurrence of cracks from the fitting of pins into the pin holes and enables pin insertion from either side during maintenance. Note: 1. •: Standard product O: Made-to-order product For further specification requirements, please contact a Tsubaki representative. 2. Plastic pins are not available. 3. Standard chain length is 120 links. (840=84.0mm) G: Standard type (gray) B: Standard type (blue) Note:...
Open the catalog to page 3Note: 1. Standard product. 2. Operating temperature range: -20°C to 80°C. 3. Bolt tightening torque: 6 N.m {0.61 kgfm} 4. When assembling the halves of the idler wheel, do not mix the halves with halves from other idler wheels. 5. Should not be used under abrasive conditions. 6. Shaft metal must be polished. 7 Solid type idler wheels are also available. Contact a Tsubaki representative for further information. Note: Made-to-order product ■ Model Numbering Plastic rail Chain type Chain side-flex radius Note: Do not leave spaces between letters and symbols.
Open the catalog to page 41-2. Installation of carry-way straight running part wearstrip 43 The layout of the guide rails for chains will vary according to the installation space available and other parameters. A typical layout is shown below. For details, please refer to the layout for top chain return-way straight running part (page 15) of the Tsubaki Top Chain Engineering Manual. (Catalog No. ME12Y2) Direction of 1) Chain slack Return rollers should be spaced at interval of 600 to 900 mm to support the return-way of the chain. The amount of slack in the chain between return rollers should be 50 to 100 mm. This...
Open the catalog to page 5Chain and wearstrip cross-section (side-flex part) [Carry way] 2. Selection 2-1. Calculation of chain load and required power For instructions on how to calculate the chain load and required power, please refer to pages 9 through 11 of the Tsubaki Top Chain Engineering Manual. (Catalog No. ME12Y2) For performance, see the graph below. 2-2. Allowable Load Graph Zroiuia Zroiuja 3. Chain handling 3-1. Assembly and disassembly of chain The D-pin type connecting pins allow for disassembly from any part of the chain. The pins can be inserted/removed from either side. 3-2. Chain Replacement...
Open the catalog to page 6For Your Safety When Using the Chain Warning To avoid danger, observe the following rules. General • Do not use chain or chain accessories for any purpose other than their originally intended use. • Never perform additional work on chain (including machining, grinding, annealing, cleaning with acids or alkalis, electroplating, or welding or cutting with a torch which will cause heat effects). These processes may cause the chain to break during operation, leading to a risk of severe injury. • When replacing a worn or damaged part, do not replace just the worn or damaged part. Replace all...
Open the catalog to page 7TSUBAKIMOTO CHAIN CO. Headquarters Nakanoshima Mitsui Building 3-3-3 Nakanoshima, Kita-ku Osaka, 530-0005, Japan Phone : +81-6-6441-0011 URL : http://tsubakimoto.com Chain & Power Transmission Sales 1-3 Kannabidai, 1-chome Kyoutanabe, Kyoto, 610-0380, Japan Phone : +81-774-64-5022 TSUBAKI of CANADA LIMITED 1630 Drew Road, Mississauga, Ontario, L5S 1J6, Canada Phone : +1-905-676-0400 URL : http://tsubaki.ca Group companies NORTH and SOUTH AMERICA U.S. TSUBAKI POWER TRANSMISSION, LLC 301 E. Marquardt Drive, Wheeling, IL 60090, U.S.A. Phone : +1-847-459-9500 URL : http://www.ustsubaki.com...
Open the catalog to page 8All Tsubakimoto Chain catalogs and technical brochures
-
TSUBAKI DIRVE CHAINS & SPROCKETS
234 Pages
-
TIMING beltand pulleys
72 Pages
-
ZIP CHAIN ACTUATOR
56 Pages
-
REDUCER FOR SERVO MOTORS TERVO
42 Pages
-
TSUBAKI COUPLINGS
120 Pages
-
ZIP CHAIN ACTUATOR
56 Pages
-
Tsubaki Miter Gear Box
64 Pages
-
Drive Chains & Sprockets
219 Pages
-
Cam Clutch BR-HT Series
8 Pages
-
Tsubaki Couplings
120 Pages
-
Tsubaki Lambda Chain Leaflet
6 Pages
-
Tsubaki Pin Gear Drive Units
6 Pages
-
Tsubaki gear motors 40 W - 5.5 kW
268 Pages
-
Titan Series Chain
4 Pages
-
TRAXLINE Cables for Motion
88 Pages
-
Power-Lock
88 Pages
-
SJ3 Sealed Joint Technology
2 Pages
-
TKA Series Plastic Cable Carrier
21 Pages
-
Tsubaki Smart Tooth
2 Pages
-
Tsubaki Cam Clutch Box Series
16 Pages
-
Tsubaki Cam Clutch
92 Pages
-
Tsubaki Pin Oven Chain
4 Pages
-
Top Chain Engineering Manual
76 Pages
-
Tsubaki Pin Gear Drive Units
16 Pages
-
Tsubaki Cleanveyor
12 Pages
-
Tsubaki Gripper Chain
6 Pages
-
Tsubaki Top Chain
246 Pages
-
Tsubaki Small Size Conveyor Chains
168 Pages
-
Tsubaki Palm Oil Mill Chain
2 Pages
-
Tsubaki Custom Made Chain
90 Pages
-
Tsubaki PC Chain Brochure
12 Pages