Tsubaki Large Size Conveyor Chains - Tsubakimoto Chain - #10

Text version of the page

9 Attachment Types Attachments can be attached at any link spacing. Standard attachments are both economical and versatile. 1. Standard Attachments (A1, A2, K1, K2, GA2, GA4) See other sections of this catalog for more information. 2. Specialty Attachments A attachments have a bent link plate on one side. They are referred to as A1, A2, or A3 attachments, depending on the number of bolt holes. A Attachments A1 Attachment A2 Attachment K attachments have a bent link plate on both ends. They are referred to as K1 or K2 attachments, depending on the number of bolt holes. K Attachments K1 Attachment K2 Attachment GA attachments have holes in the link plate itself. They are referred to as GA2 or GA4 attachments, depending on the number of bolt holes. GA Attachments GA2 Attachment GA4 Attachment Welding Additional Parts onto Chains Do not perform any additional welding, as it may result in: 1) Chain kinking or twisting due to plate distortion. 2) Brittle fracture and/or strength loss from heat. �¡Attachment Positioning Attachments will be positioned as follows unless specified elsewise. 1) Attachments will be attached on the outer link when attached on even numbered links. 2) A and GA2 attachments will be attached on the T pin side. (See pg. 22.) 3) GA4 attachments will be attached on the T pin of opposing sides. (See pg. 23.) 4) Flanges for F rollers will be attached on the T pin side. (See pg. 22.) Deep Link Chain Outboard Chain Top Roller Chain Flow Conveyor Chain A3 Attachment K3 Attachment �–Tsubaki may send an A3 attachment for some A1 attachment orders. Contact a Tsubaki representative for more information. �–Tsubaki may send a K3 attachment for some K1 attachment orders. Contact a Tsubaki representative for more information.