video corpo

Tsubaki Cleanveyor
12Pages

{{requestButtons}}

Catalog excerpts

Tsubaki Cleanveyor - 1

Tsubaki Cleanveyor Special Cable System Designed for Clean Rooms

Open the catalog to page 1
Tsubaki Cleanveyor - 2

fSllbdki ClGdnVGVOr*^ Special Cable System Designed for Clean Rooms A cable solution that realizes Zero Wear Debris1 Introducing a cable and tube system designed just for cleanroom conditions! Cleanveyor® Features Clean Class Fraunhofer Institut Production technology Noise Level *1 Based on test results from the Fraunhofer Institut Production Technology and Automation (IPA). *2 Based on IPA test results in accordance with IS014644-1 Clean rooms and Associated Controlled Environments. *3 Based on in-house test results. *4 Based on in-house test results at a travel speed of 100m/min, noise...

Open the catalog to page 2
Tsubaki Cleanveyor - 3

Pod Cable Clamp Air tube Spacer Pod support accessory Support Member (SM) Features Fluoroplastic (ePTFE) Fluoroplastic (FEP, ETFE, PFA), or Thermoplastic polyester elastomer (TPEE) Fluoroplastic (ePTFE) Tinned copper wire Tinned copper wire or bare copper wire Support Member Clamp Engineering plastic Aluminum

Open the catalog to page 3
Tsubaki Cleanveyor - 4

Basic Specifications & Performance Travel stroke (Leeway length) Moving end clamp Max. height (Leeway length) Max. height Center line Max. Travel Stroke Max. Cable Length (Note: R is the bending radius of the support member) Ambieng Temperature Diameter Types Cable Certifications/Standards I/O, Encoder, IEEE1394, Ethernet, Power, Video, Tubes for air pipes CE & UL* *Contact a Tsubaki representative regarding UL certified products.

Open the catalog to page 4
Tsubaki Cleanveyor - 5

Standard Specifications Model No. 20305-1 Total Width Connection Width *Use M4 bolts for attaching the clamp to the equipment.

Open the catalog to page 5
Tsubaki Cleanveyor - 6

Cable Code ePTFE binder tape Spiral shield Servo motor power Binder tape Bare copper wire ePTFE binder tape Spiral shield Servo motor, Binder tape Bare copper wire ePTFE binder tape Spiral shield Servo motor, Binder tape Bare copper wire ePTFE binder tape Spiral shield Servo motor, Binder tape Bare copper wire ePTFE binder tape Spiral shield Servo motor, power, encoder signal, Binder tape Tinned copper wire ePTFE binder tape Binder tape Tinned copper wire ePTFE binder tape Spiral shield Servo motor, encoder signal, control Binder tape Tinned copper wire Spiral shiel ePTFE binder tape Linear...

Open the catalog to page 6
Tsubaki Cleanveyor - 7

Tube Code Black, yellow, blue, green, clear, Material: Polyurethane Mfgrs.: SMC, Nitta Moore Black, yellow, blue, green, clear, Black, yellow, blue, green, clear, Black, yellow, blue, green, clear,

Open the catalog to page 7
Tsubaki Cleanveyor - 8

Cable/Support Member Construction for Each Clamp Model Bracket Bracket Pod Guide (Mounting Hole Pitch) (Mounting Hole Pitch) (Mounting Hole Pitch) (Mounting Hole Pitch)

Open the catalog to page 8
Tsubaki Cleanveyor - 9

Cable/Support Member Construction for Each Clamp Model Support Bracket Bracket

Open the catalog to page 9
Tsubaki Cleanveyor - 10

Layering Examples

Open the catalog to page 10
Tsubaki Cleanveyor - 11

Installation Steps 1 1. Attach a fluoroplastic sheet to the floor where the Cleanveyor will be installed. 4 4. With the moving and fixed ends temporarily tightened, run the moving end one cycle to confirm operation. (Photos 4 & 5) 2. Temporarily tighten the moving end clamp. 3. Temporarily tighten the fixed end clamp. 5 5. Once proper operation has been confirmed, tighten the moving and fixed ends. *If the Cleanveyor is twisted, adjust the position of the moving or fixed end clamp to remove the twist. Installation Instructions B 1. Run the moving end to the shortest point along the...

Open the catalog to page 11

All Tsubakimoto Chain catalogs and technical brochures

  1. Power-Lock

    88 Pages