Catalogs >
Tsubakimoto Chain >
TKA Series Plastic Cable Carrier

TKA Series Plastic Cable Carrier
21Pages

Catalog excerpts

Corporate Headquarters U.S. Tsubaki Power Transmission, LLC 301 E. Marquardt Drive Wheeling, IL 60090 Tel: (800) 323-7790 Fax: (847) 459-9515 www.ustsubaki.com Roller Chain Division 821 Main Street Holyoke, MA 01040 Tel: (800) 323-7790 Conveyor and ConstrucƟon Chain Division 1010 Edgewater Drive Sandusky, OH 44870 Tel: (800) 537-6140 Fax: (419) 626-5194 Sprocket Manufacturing Mississauga, Ontario Tel: (800) 323-7790 KabelSchlepp Division 7100 W. Marcia Rd Milwaukee, WI 53223 Tel: (800) 443-4216 Fax: (414) 354-1900 ©2013 U.S. Tsubaki Power Transmission, LLC. All Rights Reserved. Printed in U.S.A. 00/00 Rev. 0 L00000 IP54 tested & attested RATED Chip-Tight Tube Series www.ustsubaki.com

Open the catalog to page 1

■ Excellent cable protection, even at the brackets ■ Chips and dirt-resistant due to smooth surfaces ■ Increased self-supporting length - High torsional rigidity - Good inside to outer width ratio ■ Low internal noise emissions ■ Optional: Special material with protection against ■ Numerous custom material types for custom applications available Easy assembly Easy cable installation Easy-to-open cover with simultaneously high retention force on the chain link during operation Measurement scale for easy alignment of the dividers Strain relief can be completely integrated into connecting...

Open the catalog to page 2

Inside heights Unsupported arrangement Pitch 30.5 mm Inside widths Stay variants Stay variant 060 Inside: Quick-to-open cover Fixed point Stay variant 080 Outside: Quick-to-open cover A sag of the cable carrier is technically permissible for extended movement ranges, depending on specific application. Installation measurements unsupported KR [mm] Note: For order example and notes for ordering, refer to page 40.

Open the catalog to page 3

Stay variant 060 – covered on both sides with detachable covers on the inside Stay variant 080 – c overed on both sides with detachable covers on the outside Inside widths Inside widths Pitch, inside height and chain link height Pitch, inside height and chain link height hi [mm] Inside/outside width and intrinsic chain weight Inside/outside width and intrinsic chain weight Type TKA30.060 TKA30.060 TKA30.060 TKA30.060 TKA30.060 TKA30.060 5

Open the catalog to page 4

Divider systems Divider system TS1 ith continuous height separation made of aluminum w In the standard version, dividers or the complete divider system (dividers with horizontal shelves instead of height separation) can be moved in the cross section (Version A). For applications with transverse accelerations and where the carrier is side mounted the dividers can be fixed simply by turning them. This causes the arresting cams to engage in the locking profiles of the covers (Version B). Moveable divider Inside widths Fixable divider (2 mm grid) Version A moveable aTL/aTR ax min min [mm] [mm]...

Open the catalog to page 5

Universal mounting brackets (UMB) Universal mounting brackets St (UMB) The universal mounting brackets (UMB) are made from plastic and can be mounted from above, below or at the front. Inside widths The universal mounting brackets (UMB) are made from zinc plated steel and can be mounted from above, below or at the front. Inside heights BEF The connection dimensions for fixed point and driver are identical. When ordering, please specify the connection type (see order key on page 40). Assembly options Note: The connecting elements are also available as an option with cover plate. Please state...

Open the catalog to page 6

Inside heights Unsupported arrangement Pitch 38.5 mm Stay variants Stay variant 060 Inside: Quick-to-open cover Fixed point Stay variant 080 Outside: Quick-to-open cover A sag of the cable carrier is technically permissible for extended movement ranges, depending on specific application. Note: For order example and notes for ordering, refer to page 40.

Open the catalog to page 7

Stay variant 060 – covered on both sides with detachable covers on the inside Stay variant 080 – c overed on both sides with detachable covers on the outside Inside widths Inside widths Pitch, inside height and chain link height Pitch, inside height and chain link height hi [mm] Inside/outside width and intrinsic chain weight Inside/outside width and intrinsic chain weight Type TKA38.060 TKA38.060 TKA38.060 TKA38.060 TKA38.060 TKA38.060 13

Open the catalog to page 8

Open the catalog to page 9

Inside heights 26 Inside widths Universal mounting brackets (UMB) Plastic strain relief combs on one side The universal mounting brackets (UMB) are made from plastic and can be mounted from above, below or at the front. The optional strain relief combs allow quick and safe securing of the cables. The strain relief combs are mounted between the UMB brackets, and don‘t require separate screw connections or mounting on a C-rail. When ordering, please state if strain relief combs are required. Inside heights UMB connection piece with Fixing in the UMB optional strain relief comb nz = Number of...

Open the catalog to page 10

Inside heights 26 Inside widths Universal mounting brackets St (UMB) The universal mounting brackets (UMB) are made from zinc plated steel and can be mounted from above, from below or at the front. Assembly options The connection dimensions for fixed point and driver are identical. When ordering, please specify the connection type (see order key on page 40). Note: The connecting elements are also available as an option with cover plate. Please state when ordering. The connecting elements are made from zinc plated steel. Depending on the application the connection type (above or below) can...

Open the catalog to page 11

Inside heights Unsupported arrangement Pitch 45.5 mm Stay variants Stay variant 060 Inside: Quick-to-open cover A sag of the cable carrier is technically permissible for extended movement ranges, depending on specific application. Outside: Quick-to-open cover Inside widths vmax [m/s] unsupported gliding amax [m/s] unsupported gliding Load diagram for unsupported length Lf depending on the additional load Calculation of the chain length Chain length Lk Lk = L s + LB 2 Chain length Lk rounded off to pitch t

Open the catalog to page 12

TKA Series Plastic Cable Carrier 21Pages

Catalog excerpts

All Tsubakimoto Chain catalogs and technical brochures

TKA Series Plastic Cable Carrier
21Pages