TD-DL - 4 Pages

Add to MyDirectIndustry favorites
TD-DL

Catalog excerpts

More precision in levelling quality

 Open the catalog to page 1

More precision in levelling quality New measuring system for increased accuracy Since 2003, the Trützschler TD 03 draw frames are equipped with the so-called input measuring funnel. Trützschler developed this principle because the existing measuring systems with grooved and sensing roll lacked precision. Though these known systems are basically solid and robust, the bearing at one end and the high load on the sensing roll results in deformations and consequently in measurement errors. The reason lies in the large distance between grooved or sensing roll and bearings. The axis is freely...

 Open the catalog to page 2

What counts is long-term constancy Measuring systems on the draw frame must function reliably for years. Hence, the development of a new system always goes hand in hand with long test phases. The TD-DL system has successfully passed the testing process. Belt force rotating axis The deformation on the new Trützschler TD-DL system is hardly measurable and accounts only for a fraction of deformation compared to conventional systems. Belt force Improved solution for familiar system firmly anchored axis For instance, a deformation of +- 0,12 mm at 6 fed slivers totalling 30 ktex means...

 Open the catalog to page 3

Simple conversion Perfect levelling is the interaction of hardware and software Draw frames of the TD series can easily be converted to the new measuring system. The old assembly group with feed sensor is completely replaced by the new system. Next the control is upgraded with new software. Such a conversion takes only a few hours. Parallel to the development of the new measuring system, new control algorithms that perfectly match the measuring system were developed. The sliver count consistency and the 1 metre CV value have been significantly improved. Easy operation The photo shows that...

 Open the catalog to page 4

All Trutzschler catalogs and technical brochures

  1. T-TUNING

    2 Pages

  2. Tuning

    4 Pages

  3. T-DATA

    24 Pages

  4. Imagebroschüre

    64 Pages

  5. CARDS

    68 Pages

  6. COMBING

    40 Pages

  7. DRAW FRAMES

    56 Pages

  8. BLOW ROOM

    64 Pages

Archived catalogs

  1. T-DATA

    24 Pages