Filter Media - TROX - #9

/ 16


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
Pages:


See other catalogues for TROX

Text version of the page
Minipleat Filter Inserts
Minipleat filter inserts are available in the following sizes: Bx H xT
- 592 x 287 x 292 mm
- 592 x 490 x 292 mm
- 592 x 592 x 292 mm
The casing is made of plastic or stove enamelled galvanized sheet steel.
For order numbers and prices, refer to section 7 of our price list (see also leaflet F7/4.1/EN/.).
Minipleat Filter Inserts
Used as pre-filters and main filters in ventilation and air-conditioning systems which require high volume flows and extended filter life. Special features are the co-ordination of filter size, rated volume flow, pressure differential, dust holding capacity and service life.
Available in filter class F6-F9 to EN779 and H10, H11 and H13 to EN1822.
Various classes of filter media are used to achieve the required separation levels:
- cellulose paper for filter classes F6 to EN779
- glass fibre paper for filter classes F7 and F9 to EN779 and H10, H11 and H13 to EN 1822.
Minipleat Filter Inserts
F756
F757
F759
F779
F780
F781
Filter class to EN 7791)
F6
F7
F9
-
-
-
Filter class to EN 18222)
-
-
-
H10
H11
H13
Average efficiency against atmospheric dust
in %
65
85
95
-
-
-
Extraction eff. to EN 1822
in %
-
-
-
> 85
> 95
> 99.95
Initial pressure differential at nominal volume flow3)
in Pa
120
140
180
160
160
265
Temperature resistance
in °C
up to +80
up to +100
EN 779: particle air filters for general room air-conditioning technology. See leaflet F0/2/EN/.
EN 1822: "Particulate Filter (HEPA and ULPA)".
For nominal volume flow for filter size concerned, see leaflet F7/4.1/EN/.

pageCatalog pdf di En 2012-06-22-01