Rotary Seals - Trelleborg Sealing Solutions - (Version JPG) - Page n° 201 - PDF Catalogue | Technical Documentation

See other catalogues for Trelleborg Sealing Solutions

Hydraulic seal, O-ring seal, Plain bearing, Piston seal, Fitting

Text version of the page

Turcon® Roto Glyd Ring®

■ Installation recommendation - internal sealing

Figure 91 Installation drawing

Table LXII Installation dimensions


Series no.	Rod diameter d_N f8/h9		Groove diameter	Groove width	Radial clearance S max. *		Radius	O-Ring cross sec.	Number of grooves in the sealing surface
Series no.	Standard range	Available¹' range	D, H9	L, +0.2	10 MPa	20 MPa	ri	d₂	Number of grooves in the sealing surface
TG30	6- 18.9	6 - 130.0	d_N+ 4.9	2.20	0.15	0.10	0.40	1.78	0
TG31	19- 37.9	10 - 245.0	d_N+ 7.5	3.20	0.20	0.15	0.60	2.62	1
TG32	38 - 199.9	19 -455.0	d_N+ 11.0	4.20	0.25	0.20	1.00	3.53	1
TG33	200 - 255.9	38 - 655.0	d_N+ 15.5	6.30	0.30	0.25	1.30	5.33	2
TG34	256 - 649.9	120 - 655.0	d_N+ 21.0	8.10	0.30	0.25	1.80	7.00	2
TG35	650 - 999.9	650 - 999.9	d_N+ 28.0	9.50	0.45	0.30	2.50	8.40	2

Provide split housing grooves according to diameter, see Table LVIII.

At pressures > 10 MPa it is recommendable that for the cross section you choose the next larger profile according to the column "Available range" i.e. for shaft 080 mm: TG 33 00 800-.

* At pressures > 30 MPa: Use diameter tolerance H8/f8 (bore / rod) in area of seal.

Latest information available atwww.tss.trelleborg.com Edition April 2007

TRELLEBORG

SEALING SOLUTIONS

199

Rotary Seals - Trelleborg Sealing Solutions - #201

Hydraulic seal, O-ring seal, Plain bearing, Piston seal, Fitting