Hydrolic seals - Trelleborg Sealing Solutions - (Version JPG) - Page n° 29 - PDF Catalogue | Technical Documentation

See other catalogues for Trelleborg Sealing Solutions

Hose, Lip seal, Scraper, Piston seal, Hydraulic seal

Text version of the page

□

Turcon Stepseal® 2K

Ordering example

Turcon® Stepseal® 2K complete with O-Ring, standard application. Series RSK4 (from Table XI).

Rod diameter: d_N = 250.0 mm

TSS Part No.: RSK402500 (from Table XII)

Select the material from Table X. The corresponding code numbers are appended to the TSS Part No. (from Table XII). Together these form the TSS Article Number. The TSS Article Number for all intermediate sizes not shown in Table XII can be determined following the example below. ** For diameters > 1000.0 mm multiply only by factor 1.

Example: RSK6 for diameter 1200.0 mm.TSS Article No.:

RSK6X1200 - T46N.

TSS Article No. RSK4 0 2500 - T46 N


	TSS Series No. TvDe (Standard)
	Rod diameter x 10**

Quality Index (Standard)

Material code (Seal ring) Material code (O-Rinq)

Table XII Installation dimensions / TSS Part No.


Rod	Groove	Groove	TSS Part No.	O-Ring
	Diameter	Width		Size
d_N f8/h9	D, H9	L, +0.2
3.0	7.9	2.2	RSK000030	4.47 x 1.78
4.0	8.9	2.2	RSK000040	5.6 x 1.8
5.0	9.9	2.2	RSK000050	6.7 x 1.8
6.0	10.9	2.2	RSK000060	7.65 x 1.78
7.0	11.9	2.2	RSK000070	8.75 x 1.8
8.0	12.9	2.2	RSK000080	9.5 x 1.8
8.0	15.3	3.2	RSK100080	10.77 x 2.62
9.0	13.9	2.2	RSK000090	10.82 x 1.78
9.0	16.3	3.2	RSK100090	10.77 x 2.62
10.0	14.9	2.2	RSK000100	11.8 x 1.8
10.0	17.3	3.2	RSK100100	12.37 x 2.62
12.0	16.9	2.2	RSK000120	14.00 x 1.78
12.0	19.3	3.2	RSK100120	13.94 x 2.62
12.7	17.6	2.2	RSK000127	14.00 x 1.78
12.7	20.0	3.2	RSK100127	15.54 x 2.62
14.0	18.9	2.2	RSK000140	15.60 x 1.78
14.0	21.3	3.2	RSK100140	17.12 x 2.62
15.0	19.9	2.2	RSK000150	17.17 x 1.78
15.0	22.3	3.2	RSK100150	17.12 x 2.62
16.0	20.9	2.2	RSK000160	17.17 x 1.78
16.0	23.3	3.2	RSK100160	18.72 x 2.62
17.0	21.9	2.2	RSK000170	18.77 x 1.78
18.0	22.9	2.2	RSK000180	18.77 x 1.78
18.0	25.3	3.2	RSK100180	20.29 x 2.62

The rod diameters in bold type are in accordance with the recommendations of ISO 3320.

Other dimensions and all intermediate sizes up to 2600 mm diameter including imperial (inch) sizes can be supplied. All O-Rings with 12 mm cross section are delivered as special profilring.

Latest information available atwww.tss.trelleborg.com Edition April 2007

TRELLEBORG

SEALING SOLUTIONS

Hydrolic seals - Trelleborg Sealing Solutions - #29

Hose, Lip seal, Scraper, Piston seal, Hydraulic seal