SSEFE10xx-10x
1Pages

{{requestButtons}}

Catalog excerpts

SSEFE10xx-10x - 1

SSEFE10xx-10x Speed Selectable Media Converter Ordering Information SSEFE1014-100 10BASE-T or 100BASE-TX (RJ-45) [100 m/328 ft.] to 10BASE or 100BASE 1310nm SM (SC) [20 km/12.4 mi.] Link Budget: 17.0 dB Transition Networks’ speed selectable copper to fiber Media Converter allows you to extend the distance between copper based connections with the use of fiber optic cable. The ability to select the speed of converter allows for easy migration from a 10 Mbps network today to a 100 Mbps network in the future. This converter is a true layer 1 device as both the copper and fiber ports operate at the same speed setting (i.e. 100BASE-TX to 100BASE-FX). For 10 Mbps applications, these devices must be used in pairs. Single Fiber Products Recommended use in pairs Optional Accessories (sold separately) Wide Input (24 - 60 VDC) Power Supplies SPS-2460-PS Piggy Back Power Supply SPS-2460-SA Stand-Alone Power Supply Mounting Options E-MCR-05 12-Slot Media Converter Rack RMS19-SA4-01 4-Slot Media Converter Shelf Link Pass Through Automatic Link Restoration WMBD DIN Rail Bracket 5.0” [127 mm] Specifications Standards Switches 1: Link Pass Through on/off Switch Switch 2: 10 Mb or 100 Mb operation Status LEDs PWR (Power): Lit for normal operation F-ACT (Fiber Activity): Blinking = data reception on the fiber link F-100 (Fiber Speed): ON = link at 100 Mb F-10 (Fiber Speed): ON = link at 10 Mb C-ACT (Copper Activity): Blinking = data reception on the copper link C-100 (Copper Speed): ON = link at 100 Mb C-10 (Copper Speed): ON = link at 10 Mb WMBD-E DIN Rail Bracket (Extended) 4.3”[109 mm] WMBD-F DIN Rail Bracket (flat) 3.3” [84 mm] WMBL Wall Mount Bracket 4.0” [102 mm] WMBV Vertical Wall Mount Bracket 5.0” [127 mm] WMBV-E Extended Vertical Mount 4.7” [119 mm] Dimensions Width: 3.25” [82 mm] Depth: 4.8” [122 mm] Height: 1.0” [25 mm] Power Consumption Shipping Weight 2 lbs. [0.90 kg] Wall Mount Power Supply: UL Listed; C-UL Listed (Canada) Regulatory Compliance The converter can be set to 10 Mbps or 100 Mbps. Both copper and fiber ports are automatically set to the same speed. External AC/DC required; 12 VDC, 0.5A; unregulated; standard (provided) Safety Compliance Selectable speed setting: CISPR/EN55022 Class A; EN55024; EN60950 Class A; FCC Class A; CE Mark Warranty Lifetime Use the 10BASE-T to 10BASE-FL speed setting (back-to-back) to extend the distance between two 10BASE-T devices up to 40 km (24.9 mi.) using single mode fiber without a repeater. Fast Ethernet Use the 100BASE-TX to 100BASE-FX setting to extend the distance between any two 100BASE-TX devices up to 40 km (24.9 mi.) using single mode fiber. Or interface directly with a 100BASE-FX compliant port on any device to provide a 100BASE-TX port interface. Transition Networks, inc. +1.952.941.7600 info@transition.com www.transition.com ,

Open the catalog to page 1

All Nom du compte Lantronix catalogs and technical brochures

  1. SM8TAT2DPB

    1 Pages

  2. SM24TAT2DPA

    1 Pages

  3. SM8TAT2SA

    1 Pages

  4. SM16TAT2SA

    1 Pages

  5. SM24TAT2SA

    1 Pages

  6. SGPAT Series

    1 Pages

  7. TN-EOT

    1 Pages

  8. IONDCR

    1 Pages

  9. C4110 Series

    1 Pages

  10. C3100 Series

    1 Pages

  11. C2110 series

    1 Pages

  12. F-SM-MM-05

    1 Pages

  13. E-TBT-FRL-05

    1 Pages