TPO - TPH AIR ACTUATED CLUTCHES
6Pages

{{requestButtons}}

Catalog excerpts

TPO - TPH AIR ACTUATED CLUTCHES - 2

MAIN FEATURES TRANSFLUID air clutches are durable and reliable components. Their technical development has been achieved with years of experience in the field of transmissions. With transmittable torques of up to 14000 Nm and being selfadjusting, they satisfy many different applications. Air actuation allows for easy engagement control and they can be remote controlled. The main technical features are: - Operating discs made of a high quality cast iron with large surfaces to dissipate heat generated from friction - The friction discs are made of an asbestos-free composite compound that is...

Open the catalog to page 2
TPO - TPH AIR ACTUATED CLUTCHES - 3

Tab .2 - DIMENSIONS: mm (inch) Prime mover CLUTCH SELECTION GUIDE • The input power can be used to determine the torque limitation for the clutch: T = 9550 x kW / rpm Nm T = 7058 x kW / rpm lbs-ft • to the nominal transmitted torque, it is necessary to add a service factor “S” which depends upon prime mover and type of load: Tkn > S x T, where S factor is taken from table 3 Tab .3 - SERVICE FACTOR S MODEL DIMENSIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE

Open the catalog to page 3
TPO - TPH AIR ACTUATED CLUTCHES - 4

TPO AIR ACTUATED CLUTCHES OPTIONAL ACCESSORIES ASSEMBLY WITH QUICK RELEASE VALVE (ONLY FOR TPO 214 - 318) ASSEMBLY WITHOUT QUICK RELEASE VALVE quick release valve offset elastic pin TF 5226A - TF 5226 / Less fitting adapter 1/2” - 14 NPT

Open the catalog to page 4
TPO - TPH AIR ACTUATED CLUTCHES - 5

APPLICATION EXAMPLES Outboard mounting Clutch and sheave supported between two pillow blocks ELECTRIC MOTOR Air sheave version with sleeve fitted on EM shaft For in-line drive with flex coupling or U-joint, on inp

Open the catalog to page 5
TPO - TPH AIR ACTUATED CLUTCHES - 6

‘to industrial & marine MAIN FEATURES The TPH model is designed for in-line drives and is based on the standard TPO clutch pack with a self-contained stationary thruster operating with 9 bar (130 Psi) air pressure. The standard input for the TPH clutch is through the drive ring side by a flexible coupling or a universal joint flange. Typically the output is fixed and supported by the driven equipment (pump, generator, reduction gear etc). If required the input and output can be reversed . To simplify installation an air power-pack, 12 or 24 Vdc is available. PERFORMANCES MODEL CLUTCH...

Open the catalog to page 6

All Transfluid catalogs and technical brochures

  1. Bellmarine

    28 Pages

  2. Batteries

    4 Pages

  3. STELLADRIVE

    8 Pages

  4. TPO-TPH

    6 Pages

  5. NBG-TFDS

    4 Pages

  6. TowerClutch

    8 Pages

  7. High Speed

    8 Pages