SL SPRING LOADED BRAKES
4Pages

{{requestButtons}}

Catalog excerpts

SL SPRING LOADED BRAKES - 1

n-n—■ drive with us SL SPRING LOADED BRAKES

Open the catalog to page 1
SL SPRING LOADED BRAKES - 2

operation The spring loaded SL brakes are designed for all applications where a fail safe brake is required. The brake consists of an hydraulic assembly, a plate assembly and a driven hub which can be supplied by TRANSFLUID upon request or can be manufactured by Customer. SL brake is a hydro-mechanical device which is Spring Loaded and hydraulically released. A spring load exerts a compressive force between steel plates, which are mounted on the rotating shaft, and sintered plates mounted in the gear tooth ring. When oil pressure is applied, the spring load is relieved and the plates are...

Open the catalog to page 2
SL SPRING LOADED BRAKES - 3

SL spring loaded brakes - 20.09 Dimensions are subject to alteration without notice

Open the catalog to page 3
SL SPRING LOADED BRAKES - 4

SL SPRING LOADED BRAKES ASSEMBLY 1 – Fit hub A onto the shaft. 2 – Mount gasket B and gear tooth ring C on the frame of the machine. 3 – Insert the plates as follows: sintered plate D, steel plate E and so on: the complete pack should end with a sintered plate D. 4 – Mount gasket F, hydraulic assembly G, gasket H and end plate K. 5 – Tighten screws L up to a particular locking torque. 6 – Close outlet hole by plug M (supplied by Customer). 7 – Fill with oil the plate group up to the level hole which must then be closed by plug N (supplied by Customer). Close filling hole by plug P (supplied...

Open the catalog to page 4

All Transfluid catalogs and technical brochures

  1. Bellmarine

    28 Pages

  2. Batteries

    4 Pages

  3. STELLADRIVE

    8 Pages

  4. TPO-TPH

    6 Pages

  5. NBG-TFDS

    4 Pages

  6. TowerClutch

    8 Pages

  7. High Speed

    8 Pages