Automatic Bending Centers

The TUBOTRON 90currently is the mostpowerful bending machine manufacturer from TRACTO- TECHNIK TUBOTRON 30multiple-radii bender with automatic feeding and extraction device. Pipe separation and precise length alignment

Automatic feeding and unloading

Taking shortcuts and optimizingproductivity

PC and machine control can be serviced remotely by a TRACTO-TECHNIK specialist by utilizing theteleservice interface.This feature guarantees that the machine is always updated according to the latest state.Any problems can be solved on short notice and the know-how and experience of the TRACTO- TECHNIK technicians is at the customer’s disposal worldwide.Depending on the machine type,pipes of up to 90 mm in outside diameter and with a maximum bendingradius of 250 mm can be processed.All functions (bending,length feed,rotation for plane of bend) are carried out automatically.If desired,the TUBOTRON 20 and 30 are available with multi-radius capability, right-left bending unit and automatic feeding and unloading facility.Thus a maximum of flexibility and productivity as well as highest quality can be achieved. For pipe bending applications in mass industrial production TRACTO-TECHNIK has developed various automaticfeeding and unloading systems,which can be flexibly adapted to the respective requirements of our customers.The separation picks the single pipes automatically from a industrial hopper and positions them in the feedingsystem.Apart from the precise length adjustment and as option,when bending lengthwise welded pipes, a weld seam detection system with rotational alignment of the pipe can be included.The pipe is fed into the bending machine either from the front (for bending with mandrel) or sideways (forbending without mandrel).However it’s important that the bending space of the machine is not restricted by the pick and place system.The bent pipe is deposited automatically at its designated location,while the next pipe is already available to be fed into the bending machine.

TUBOTRON 30 with portal system for tool feeding and unloading. The TUBOTRON 50bends pipes up to 50 mm OD. Due to the TUBOTRON 20 RL’s right-leftbending device complicated pipe figures can be produced.
10 / 11 TRACTO-TECHNIK