Sensor Highlights 2018
12Pages

{{requestButtons}}

Catalog excerpts

Sensor Highlights 2018 - 1

Sensors Highlights 2018 www.tr-electronic.com

Open the catalog to page 1
Sensor Highlights 2018 - 2

SHF' EtherCAlT* Ether.'et/IP POWERUNK |erCOS me sm/cos Hollow shaft (continuous) Connections at the side _Three basic mechanical systems for almost any installation location Solid shaft Blind shaft (slip-on hollow shaft) Connections at the back or side Connections at the back or side Absolute robust, conde CM_582 Single: 13 bit Multi: 12 bit Linearity 0.5° highly precise CE_582 Single: 15 bit Multi: 12 bit Linearity 0.01° highly precise IE_58 / IE_582 up to 10,000 pulses IO_58/IO_582 up to 65,536 pulses Option: programmable Real double rotary encoders for increased availability The...

Open the catalog to page 2
Sensor Highlights 2018 - 3

CD_58M Double rotary encoder Two rotary encoders in the standard size of 58 mm Applications in which availability or safety are to be increased by using double sensors are constantly increasing. Redundant double rotary encoders are usually larger than single sensors. With the CD_58MM TR-Electronic now offers a fully redundant multiturn rotary encoder, which has the standard installation space of a 58mm rotary encoder. A typical encoder with pushon hollow shaft (blind shaft) needs a depth of approx. 65 mm with a nominal diameter of 58 mm and a lateral plug. The CD_58MM thus generally fits...

Open the catalog to page 3
Sensor Highlights 2018 - 4

ID_58P Redundant incremental rotary encoder Double incremental encoder 58 mm The increased availability of position signals is becoming more and more important for incremental measuring systems. The fully independent scanning units of the ID_58P can be programmed with their own individual resolution. It is also possible to set the signal level of each output stage to either 5 V (TTL) or operating voltage level (HTL). The reliability values can also be shown separately for each scanning unit. This paves the way for integration into the user's own availability and safety concepts. _ Compact...

Open the catalog to page 4
Sensor Highlights 2018 - 5

IP_58, IP_582 Incremental rotary encoders optionally programmable Equipped with the latest robust scanning technology, the IP_58 incremental rotary encoders are the cost-optimized solution for all purely incremental positioning tasks. The wide-range power supply unit reduces the number of variants required. The standard flange/shaft combinations are available for the European market. If inch dimensions are preferred, TR can provide appropriate shaft diameters and flange geometries. In the configurable version, the IP_582 incremental rotary encoder becomes a logistical miracle: One product...

Open the catalog to page 5
Sensor Highlights 2018 - 6

CP_58 - the combination expert Two interfaces in one rotary encoder, 58 mm size The large family of rotary encoders in size 58 includes one very special member: The CPV58 and CPS58 rotary encoders, with special interfaces and interface combinations, offer compact solutions for special challenges. As part of this family we also offer TR-Electronic's very first IO-Link absolute rotary encoder. _ Multiturn rotary encoder _ Singleturn rotary encoder SSI, Analog, CAN, IO-Link SSI + Analog, CAN + IO-Link Robust and resistant to condensation thanks to fully magnetic disc scanning. _ Technical data...

Open the catalog to page 6
Sensor Highlights 2018 - 7

CDV115M+FS Absolute multiturn rotary encoder SIL3 / PLe in heavy duty protective housing Sometimes the world is really tough. Strong forces on the drive shaft or the risk of external mechanical influences sometimes make the use of a standard rotary encoder impossible. With the CDV115M+FS, TR-Electronic combines many years of experience with its best-selling protective housing with the Functional Safety characteristics of the SIL encoder series CD_75. The robust bearing unit also absorbs high axial and radial forces; shaft diameters of 20 mm thus present no problem. Naturally the scanning...

Open the catalog to page 7
Sensor Highlights 2018 - 8

LMRS34, LMPB34 Linear measuring systems The compatible standard for absolute position measurement LM_S34 closes the gap between high-resolution and cost-optimized. _ Resolution for industrial standard applications _ Universal profiled housing The flat profiled housing will fit in almost any existing installation space for linear measuring systems. _ Tubular housing with proven geometry In the tubular housing, the LMRS34 fits into commercially available hydraulic servo cylinders. _ Wide range of magnets All TR magnet variants are available for tubular housings. The newly designed magnetic...

Open the catalog to page 8
Sensor Highlights 2018 - 9

LM_I46 Linear measuring system Industry standard with wide variety of interfaces Based on the successful LA46 and LP46 series, TR-Electronic has developed a new generation of magnetostrictive absolute position measuring systems. The series are available in a profiled housing with guided magnet (LMPI46) and in a tubular housing for cylinder integration (LMRI46), and are mechanically identical to the currently supplied series. Better performance is enabled by an optimized measurement acquisition which operates internally. _ Improved sensor performance Resolution and hysteresis are...

Open the catalog to page 9
Sensor Highlights 2018 - 10

Rotary encoders Absolute encoder, incremental rotary encoder, wire-actuated encoder Rotary encoders with optical and magnetic scanning function register the precise position in a wide variety of applications and industries. In medical engineering, miniature versions ensure correct positioning while SIL3-approved absolute rotary encoders provide the necessary safety. We offer not only high-quality rotary encoders (from 0 22 to 160 mm) for almost any application but also comprehensive accessories. Linear encoders Linear absolute measuring systems, laser displacement measurement Linear...

Open the catalog to page 10
Sensor Highlights 2018 - 11

Industrial PC, field bus I/O, PLC, HMI controller Consulting and implementation for new machines and retrofit Blanking and forming, systems, controls and sensors Industrial PCs are available in numerous variants and offer customized calculation power for PC-assisted automation. Programmable logic controllers (PLC) are the traditional means for automation. HMI controllers establish the interface to the user. Field bus nodes, I/O modules and cam controllers complete the range of automation components. You want to set up a largely automated new machine or retrofit and modernize your existing...

Open the catalog to page 11

All TR-Electronic GmbH catalogs and technical brochures

  1. The catalog

    562 Pages

Archived catalogs

  1. TRgroup

    12 Pages

  2. Profinet

    4 Pages