Catalogs >
TQC Sheen BV >
TEMPERATURE CONTROL JACKET FOR VISCOSITY CUP

TEMPERATURE CONTROL JACKET FOR VISCOSITY CUP
3Pages

Catalog excerpts

TEMPERATURE CONTROL JACKET FOR VISCOSITY CUP - 1

Vision on quality www.tqc.eu TEMPERATURE CONTROL JACKET VF2067 for DIN and ASTM types, VF2068 for ISO and AFNOR types A double jacketed casing of anodized aluminum to bring the viscosity beaker to the required temperature with cooled and/or heated liquids by use of a thermostatic circulated bath. BUSINESS Coating industry, paint maker, laboratory, painter According / Similar to DIN - ASTM - ISO - ISO - Ford etc. Look up the appropriate standard for a correct execution of the test, FEATURES Made of titanium anodized aluminium Adjustable feet for easy leveling Built-in spirit level to set jacket exactly horizontal. Glass plate to prevent dripping before measurement Elbow-type Quick release couplings Jacket with built-in spirit level, glass plate and tube connection ORDERING INFORMATION 2908 LL Capelle aan den IJssel The Netherlands e-mail: info@tqc.eu www.tqc.eu

Open the catalog to page 1

TEMPERATURE CONTROL JACKET FOR VISCOSITY CUP - 2

Vision on quality www.tqc.eu Viscosity beaker. Similar to DIN 53211 titanium anodized aluminum VF2000 orifice 2 mm. Viscosity beaker. Similar to DIN, EN, ISO 2431 stainless steel Viscosity beaker. Similar to DIN, EN, ISO 2431 anodised aluminum VF2048 orifice 3 mm. Viscosity beaker. According to ASTM anodised aluminum - orifice No. 1. Viscosity beaker. According to ASTM stainless steel VF2041 orifice No. 1. VF1980 SPECIAL DESIGN STAND S20 FOR VISCOSITY BEAKER Deluxe stand, adjustable in height. Equipped with a hinged cover plate, which enables quick measurements, Built-in...

Open the catalog to page 2

TEMPERATURE CONTROL JACKET FOR VISCOSITY CUP - 3

Vision on quality www.tqc.eu • fill the cup up to the edge with paint. • put the glass plate on top of the cup to get rid of the redundant paint. • remove the finger from the nozzle. • take the stopwatch and start it while sliding the glass plate from the cup, • stop the time when the paint starts to drop from the nozzle. Push the two provided tubes firmly in the fast couplers, connect other ends by use of adapters to a temperature controlled circulating liquid reservoir. Connect the lower coupler on the jacket to the pump outlet of the reservoir. Note. Former jackets do have fixed...

Open the catalog to page 3